Motorcycle Skene Dimmer Wiring Harness - Universal - feed

Overall rating: 5.0 / 5 from 2 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["beam"].

Review highlights

Reviews

Must have addition.

"This is one of the 1st things I add to my road bikes. This is just my 2nd dimmer. My 1st one was on my old bike for 4 or 5 years and still working when I sold the bike. This one has been flawless to date also."

— Joe (5/5)

This is such a slick

"This is such a slick little gizmo that I mounted too my XL80 driving lights on my Toyota Tundra. There is room on it to control two-lights, and it gives you the opportunity to run it at a factory preset 10/20/50% by grounding/12+/ leaving open circuit (not in that order) but what's even more useful is hooking it up ion one of the positions (I chose 50% by looking up the yellow wire to 12 volt), then going into programming mode which is explained very well in the manual. You don't need to change any wiring using the programming mode, and it lets you set the low beam at 0% to 100% in 10% increments. I found that 30% was good for a low beam setting on the road, but to toggle through all the settings over and over to really get it right without having to singe any wiring (you just flash the high beam for the next 10% increment up until you hit 100%, then back to 0% on the high beam flash) is a killer design and I'll report back if the unit doesn't hold up. I'm setting up my squadron fogs on another one of these gems, and I'm happy to say each channel can take 12 amps (24 amps if you use both channels for one light) and 144 watts(288 both channels for one light). My XL 80s are something less than 6 amps and 80 watts apiece- too easy!"

— Anonymous (5/5)

Q&A

SKU: feed
$83.95
PRODUCT OPTIONS
Quantity

OR

Proposition 65 Warning
Baja Designs California Proposition 65

Description

SKU: 66-0055; The IQ-275 Intelligent Lighting Controllers from Skene Design allow you to quickly and conveniently set the brightness of your auxiliary lights to match riding conditions. Often auxiliary lights are too bright or have too wide a lighting pattern to operate at full power during the day or under certain road conditions. With Skene Design's innovative intelligent lighting controllers you can pre-program several different brightness settings and with the flick of a switch immediately select the desired brightness.

Detailed Specs

SKU: 660055

Specifications

Application Motorcycle
Description Pre-Program Settings
Mounting Hardware Included No
Product Type Motorcycle Dimmer Wiring Harness
Switch Included No
Universal or Specific Universal
Wiring Harness Description IQ-275 Intelligent Lighting Controller/Programmable Skene Dimmer
Wiring Harness Included Yes