It may look like a 1980’s Chevrolet C20 square body, but that is only half the story. We take a look at this sleeper built around a 1987 Chevrolet pickup with a 6.6L Duramax diesel shoehorned under the hood making this a unicorn of custom builds. We take a closer look at this build from our friends at @dmax_squared It's all in the details The engine is a LBZ - 6.6L Duramax Diesel from 2006 Silverado 3500HD mated to a DmaxStore Stage 3 built Allison 1000 6 speed to handle getting the power to the ground with a Dana Super 60 from 2006 F350 Superduty.  Lighting Package: Dmaxstore didn't skimp when it came to adding lights to this insane build.  Starting at the front of the truck is a is a set of Squadron Sport and Squadron Pro fog lights inside a custom fabricated bumper providing illumination down low when in dusty situations. This combination will give the driver a great blend of near field and long distance lighting for safety. Moving up to the a-pillars is a pair of LP4 Pros mounted on custom fabricated mounts. This allows for more illumination within a ditch light setup, as the LP4's IPT (integrated peripheral technology) allows for a 200-degree spread of light. For the roof, dmaxstore opted to outfit their C20 with our popular 8XL Linkable light bar mounted on custom mounts. The XL Linkable provides 45-degrees of adjustability within each individual light.  Quick View LP4 Pro LED Auxiliary Light Pod Pair Universal $875.95 The Baja Designs LP4 Pro, the smallest variant in the LP lineup, maintains the power and features of its siblings. With a total of 8,857 lumens... Quick View XL Linkable LED Light Bar Universal Starting At:$772.95 Experience full adjustment and total performance with the Baja Designs XL Linkable LED light bar kit, engineered for enthusiasts seeking to take... Quick View Squadron Sport Black LED Auxiliary Light Pod Pair Universal Starting At:$249.95 Upgrade your light package with the Squadron Sport LED light pair from Baja Designs. Don’t let the compact size of these 3” light... Quick View Squadron Pro Black LED Auxiliary Light Pod Pair Universal Starting At:$429.95 Light up the night with Squadron Pro LED light pair from Baja Designs. Don’t let the compact size of these 3” light pods fool you... We are excited to be featured on a special build like this C20 duramax diesel swapped truck. It hits the perfect balance of nostalgia and technology all rolled into one sweet truck. To see more information on this build visit dmaxstore . For lighting, be sure to visit bajadesigns.com 

At Baja Designs, every light we create starts with one goal in mind, performance that's proven in the most punishing conditions on earth: racing. Only after a product survives Baja do we bring it to you. The S1 is no exception.This little light delivers serious output in a 2.1-inch housing, making it the most versatile compact LED we've ever engineered. Whether you're building a chase rig, upgrading your UTV, or just need more light in tight spaces—the S1 is your go-to.Take an inside look at what makes the S1 the most versatile and powerful compact light in our lineup—built by the Scientists of Lighting. https://www.youtube.com/watch?v=foGqzWdfVOQ Race-Proven DNA in a Palm-Sized Package At just 2.1 inches, the Baja Designs S1 puts out 2,320 lumens using a single high-output LED paired with ClearView® optics illuminating into lighting. Zones 1, 2, 4, and 51. That means you get performance normally reserved for larger lights—now in a form factor that fits anywhere. We took the DNA of our race-proven XL80, scaled it down to a single 20-watt LED and optic, and created a light that's small enough to mount just about anywhere—but tough and bright enough to be used as a standalone driving light. Built for Just About Anything The ethos behind the S1? Small but powerful. You want a chase light? Done. A tight-fit driving light? No problem. Something to light up your camp or workspace? Easy. This light is one of the most adaptable stand-alone lights in your lighting setup and we've built kits around the S1 for specific platforms and use cases:  Quick View S1 Black LED Auxiliary Light Pod Pair Universal $232.95 The Baja Designs S1 fills the shoes of a large light within a small and compact design. The S1 utilizes a highly specialized reflector and next... Quick View S1 Black Flush Mount LED Light Pod Reverse Kit Universal $354.95 Designed from the ground up our new S1 fills the shoes of a large light in a small package! The S1 utilizes a highly specialized reflector and... Quick View S1 White LED Auxiliary Light Pod Pair Universal $255.95 The Baja Designs S1 LED Lights fill the shoes of a large light within a small and compact design. Finished in white powdercoat, the S1 utilizes... S1 Headlight Kits for UTVsThe Baja Designs S1 Headlight Kits for UTVs such as the Can-Am Maverick R, Polaris RZR Pro R and Kawasaki Teryx KRX1000 are plug-and-play replacements for the OEM headlights delivering massive increases in usable light and off-road performance. Maintains a clean, OEM-style look Dramatically improved beam distance and width Easy install, all hardware included Whether you're racing or just out exploring, these kits deliver real off-road visibility.  Quick View Can-Am Maverick R Triple S1 Headlight Kit Can-Am Maverick R 2024-2025 $939.95 Elevate your Can-Am Maverick R with the Baja Designs S1 Headlight Kit, engineered to deliver a high-performance lighting solution that replaces... Quick View Polaris S1 Triple LED Headlight Kit Polaris 2020-25 RZR Pro XP, 2022-24 RZR Pro R/Turbo R $1,027.95 For a performance oriented UTV you need Performance oriented lighting. We've sought out to give the end user a significant bump in output from... Quick View Kawasaki Teryx KRX S1 LED Headlight Kit 2023-2024 Kawasaki Teryx KRX 1000 $1,204.95 Upgrade your lighting with the Baja Designs S1 Headlight Kit for the Kawasaki Teryx KRX 1000. This high-performance kit replaces your factory... The S1 Trail Lens We took the S1's versatility even further by developing a dedicated Trail Lens, designed specifically for motorcycles, dirt bikes, and singletrack riding. It's a targeted solution for riders who ride slower, more technical trails — giving you light exactly right where you need it – optimizing a light beam pattern with both vertical and horizontal light spread. We developed the Trail Lens because we ride the same trails you do — and we know how frustrating it is when your light doesn't hit where it should. Through testing, trail riding, and real-world rider feedback, we engineered a solution that gives you more usable light exactly where you need it.  Quick View S1 with Trail Lens LED Auxiliary Light Pod Universal $122.95 The all-new Baja Designs S1 Trail Lens expands on ClearView technology with an all-new lens pattern specific to slower speeds on a motorcycle... S1 Hitch Light Kit Whether you're reversing on the trail or lighting up camp, the S1 Hitch Light Kit turns your 2" hitch receiver into a clean, functional rear light. It includes a secure mount and a plug-and-play harness, so you can install it in minutes. Great for backup lighting Trail-ready and rugged It can be used as a chase light Easily removable when not in use or towing  Quick View S1 Universal Hitch Light Kit Universal Starting At:$154.95 The Baja Designs S1 hitch light kit is a powerful and versatile lighting solution for outdoor enthusiasts and off-road adventurers. This compact... S1 Laser Want even more distance? We integrated our laser technology into the S1 housing. It's perfect for high-speed runs—or for lighting up somewhere deep in Zone 51.  Quick View S1 Black Laser Auxiliary Light Pod Universal $308.95 Designed from the ground up our S1 Laser fills the shoes of a large light in a small package! With the 2.1 inch length, width, and height the... Quick View S1 Black Laser Auxiliary Light Pod Pair Universal $617.95 Designed from the ground up our S1 Laser fills the shoes of a large light in a small package! With the 2.1 inch length, width, and height the... Every S1 comes with options—thanks to our uService® lens interchange system and beam-specific optics. You can choose: Spot – long-distance focused beam Wide Cornering – ideal for trail and corner lighting Work/Scene – broad output for camp or area lighting Trail – designed specifically for motorcycles and singletrack riding with a vertical and horizontal light spread Always InnovatingAt Baja Designs, innovation always starts with a challenge—and ends with a solution that's race-proven and adventure-ready. The S1 embodies that spirit. It may be small, but it's built to perform in the harshest environments, from wide-open deserts to tight singletrack. With multiple configurations, beam patterns, and vehicle-specific kits, the S1 gives you the flexibility to light your way—no matter where the road, trail, or racecourse takes you. Like every Baja Designs product, it's backed by our 30-Day Satisfaction Guarantee and Lifetime Limited Warranty. 

At Baja Designs our products are not only for performance, but also safety. While an effective forward-projecting lighting package is so you can see where you're going, chase lights allow others to see you. Adding a chase light allows for visibility in the rear when encountering dust or harsh conditions so your vehicle can be easily seen by groups behind you. The chase light often gets overlooked as the last piece to the puzzle for most lighting packages, however, a chase light should be one of the first light modifications you should consider when building an effective lighting package for your offroad vehicle. The Best Lens Pattern for a Chase Light? To not blind the drivers behind you, it is essential to diffuse the light emitting from your chase light as much as possible. This makes it easier for drivers to spot your position on the trail. Our S2 Sport Universal Chase Light Kit comes standard with our Work/Scene lens pattern in Baja Amber. This allows for an extremely smooth light near the vehicle, offering a “marker” type light without disturbing the driving abilities of other drivers on the trail.  Enthusiasts can also use our wide cornering lens pattern in baja amber, which will act to illuminate behind your vehicle, much the same as a reverse light. The Best Lens Color for a Chase Light? For optimal performance in dust, snow, or fog, our baja amber is the preferred lens color of choice. While red, green, or blue lenses can be used, they are generally used for race applications only. Amber light is universally recognized as a caution light, making our Baja Amber lenses a great option for your chase light. Baja amber effectively cuts through dust and inclement weather, improving visibility in challenging conditions.  Changing Lens Patterns is as easy as uService With Baja Designs uService Technology, your chase light doesn't have to stay a chase light forever. You can easily swap the lens pattern or color (with the exception of the RTL), allowing you to reposition the light anywhere on your vehicle without needing to purchase a new one. Plus, if you already have a forward-facing Baja Designs light, you can simply buy the appropriate lens and convert it into a chase light.RTL - Rear Tail LightBorn out of necessity, the RTL is a race bred chase light built for the rigors of racing Baja where dust can blind vehicles. Being the "Scientists of Lighting", we set out to create a chase light bar that would be brighter and safer for off-road racers, thus our Rear Tail Light, or RTL was born. The Baja Designs RTL Chase Light has been must-have for any serious off-road racer since its introduction, offering unmatched safety, visibility, and functionality in challenging conditions such as Baja. Designed specifically for rugged terrain, the RTL Chase Light bar provides powerful rear lighting that enhances visibility through dust, fog, and darkness—critical for maintaining safe distances during high-speed desert runs or trail rides. With integrated features like brake lights, turn signals, and running lights, this Baja Designs chase light ensures you're not only seen but clearly understood on the trail. Whether you're racing or recreationally exploring, the durability and performance of a Baja Designs RTL make it an essential upgrade for any off-road vehicle.The RTL series of rear LED light bars has many uses on a vehicle. These bars can function as off-road brake lights, running lights, cargo lights, or license plate lights. The original RTL light bar is a 30-inch long fixture with several practical variations. With the various options to meet race-legal rear taillight requirements in the RTL-B and RTL-G ensuring visibility on the racecourse, you can confidently take the lead knowing that you’re easily visible to others. This all-inclusive kit comprises the selected RTL bar and mounting hardware for simple installation, ensuring your setup is trail-ready. The benefits of an RTL include Enhanced Safety – providing improved visibility in dusty and foggy conditions – and Durability – crafted to endure the challenges of off-road driving.  It comes down to one word - Safety If you're looking for a simple, compact chase light setup, the S2 Sport Universal Chase Light Kit will provide an extra layer of safety without breaking the bank. The Squadron light, though slightly more expensive, offers great versatility in various applications and mounting positions. Its increased intensity and power enable it to serve as a chase, cargo, and scene light all in one. The RTL is our premium option, offering additional features like brake, reverse, and chase functions, unlike the basic on/off function of traditional auxiliary lights. No matter which setup you choose, one thing is certain: safety comes first when off-roading, and regardless of your budget, we have a trusted solution for you. Quick View S2 Sport Universal Chase Light Kit Universal $164.95 The S2 Sport Universal Chase Light Kit from Baja Designs is the perfect solution to improve safety and visibility during your offroad adventures.... Quick View RTL LED Rear Light Bar Universal $489.95 Improve safety during your off-road adventures or races with the Baja Designs RTL, or Rear Tail Light, offering enhanced visibility at the rear... Quick View RTL-M Mini LED Rear Light Bar Universal Starting At:$221.95 The RTL-M (Rear Tail Light – Mini) is a miniature version of Baja Designs’ existing RTL. At a compact 6-inches, this light bar is...

If you ask most photographers in off-road desert racing how they got started, many will tell you the same thing: they dreamed of racing, but couldn't afford it. The next best thing? Capturing it through the lens. That's how Art Eugenio Jr.—better known as Get Some Photo—built his storied 25-year career shooting desert racing in Baja and the U.S. https://www.youtube.com/watch?v=8PJh5PAxNgg&t=170s While he spent decades on the sidelines capturing victories, defeats, and everything in between, Art never let go of his dream to race. Now, that dream is becoming reality. In 2025, he'll line up at the start of the NORRA Mexican 1000 behind the wheel of his freshly built 1994 Ford Bronco, racing in the Prerunner class. Art originally bought the Bronco from ESPN broadcaster Bob Bower over a decade ago. It started with a simple Rancho lift kit and served as his daily driver and vehicle to go scout photo locations for races in Baja. Over the years, it evolved—getting upgrades after every trip, little by little. The idea to race it goes back to 2012, when Art chased the NORRA Mexican 1000 with a friend and brought along his dad, a former Class 5 racer. That trip sparked a plan to build the Bronco and race Baja together. Sadly, Art's father passed away in 2014 before they could make it happen. Now, over a decade later, the Bronco is finally finished—his dad's name is proudly displayed on the door with his ashes on the dash. It's more than a race truck—it's a tribute. If you're a Bronco nerd, you'll notice the front clip is from an earlier model. That's intentional. After the truck was damaged in a shop accident, Art chose to "backdate" it with a 1990-style brick nose and slant hood. It not only improves visibility but also nods to the Class 8 trucks of the '80s and '90s. Underneath, the Bronco runs a stock-width long-travel Twin Traction Beam setup from Desolate Motorsports with King 3.0 internal bypass shocks and a custom swing set steering system. Out back, it's equipped with custom leaf springs, King 3.0 triple bypasses, and a Desolate sway bar. A fun detail is a mudflap that is hose clamped on the shock to protect the shock shafts from getting pitted from rocks, just another clever way to improvise in Baja. Lighting is handled by two Baja Designs LP9 Pros and a 20" OnX6+ light bar in amber up front—more than enough to keep things lit in the dust and fog. As Art puts it: "If you need more light than this, you're probably driving too fast at night." Out back is one of the wildest and most ridiculous chase lights we've seen—a 40" OnX6 dual-control bar in amber and white. It's fully integrated with his sPOD BantamX system, allowing Art to dim or strobe the rear lights for visibility in thick dust—just in case a Trophy Truck is barreling down behind him after having a slow early start trying to make up time. The Bronco sits on Raceline Ryno Beadlock wheels wrapped in 35-inch BF Goodrich KDR3 + tires that were developed for Rally Raid and Dakar. I'd be willing to bet these tires have never been mounted up to a 1994 Ford Bronco before but can usually be seen on cars like the 2025 Ford Raptor T1+. Either way, they look awesome. The interior is just as dialed. A Solo Motorsports roll cage was the foundation, later integrated into the chassis to meet NORRA's safety standards. Inside are three PRP Podium seats, PRP harnesses, a PRP steering wheel, and essential communications. Storage for spare parts, spare tire GPS system, and everything you would typically see in a race car. Art's journey from photographer to racer is a reminder that there's more than one way to be part of off-road racing. After years on the sidelines, he's finally getting the chance to live out a dream he's carried for decades. With the Bronco built and his dad's name on the door, he's heading to Baja not just to shoot the action—but to be part of it in his own Bronco racing his own race. The 2025 Mexican NORRA Mexican 1000 starts in Ensenada on April 26 in Ensenada with 6 days of racing ending in San José del Cabo with a combined race course of over 1300 miles.

If you ride dual-sport, enduro, or anything that keeps you in 1st through 3rd gear, you already know how critical good lighting is. That’s exactly why we developed the new Baja Designs S1 Trail Lens.This isn’t just a new lens pattern designed specifically for the S1 light. It’s a targeted solution for riders who ride slower, more technical trails  — giving you light exactly right where you need it - optimizing a light beam pattern with both vertical and horizontal light spread.Let’s break down what it does, and why it might be worth upgrading your current S1 setup.https://www.youtube.com/watch?v=OCC-k_-thDkWhy the S1?The Baja Designs S1 is our smallest light pod, but don’t let its size fool you. It puts out 2,320 raw lumens using just 20 watts, making it incredibly efficient for how much light it throws.We’ve always designed the S1 to be versatile — it works great as a driving light, ditch light, chase light, or even mounted to racks or bumpers. And with multiple lens patterns thanks to our ClearView™ technology like Spot, Wide Cornering, and Work Scene, it covers a lot of ground.But for the rider who spends most of their time on tight trails or navigating steep climbs and switchbacks — we knew we could do better. With countless miles on the trail and with the ever-expanding moto-specific lighting solutions with the S1.Introducing the Trail LensThe S1 Trail Lens is a brand-new beam pattern designed with enduro and technical trail riding in mind. Think: 1st through 2nd gear trail riding, rocky switchbacks, tree cover, elevation changes — the places where your standard beam might fall short because of the lack of a vertical spread.This lens expands on our ClearView™ technology by combining vertical and horizontal spread into a single pattern. This gives you more light not just in front of the bike but also into dips, valleys, and around corners—exactly where your eyes (and your front tire) need to go next. SHOP S1 with TRAIL LENS How It’s DifferentIf you're already running a Wide Cornering lens, you might be wondering what sets the Trail Lens apart. The biggest difference? Vertical spread. Wide Cornering throws a nice beam side-to-side, but it’s fairly flat. When you're leaning into a corner or cresting a ridge, you can lose some of that light where you actually need it — down low and up ahead. The Trail Lens fixes that with a taller beam, helping you see more of the trail at crucial angles. Clear vs. Baja Amber — Which Should You Choose? Just like our other S1 options, the Trail Lens Kit is available in both Clear and Baja Amber. This offers uService to current S1 users the ability to switch out their lens and experience the difference.Clear: Maximum brightness and distance.Baja Amber: Slightly reduced output (approximately ~15%), but improved visibility in dust, fog, and low-contrast environments. SHOP S1 TRAIL LENS REPLACEMENT KIT S1 Trail Lens We developed the Trail Lens because we ride the same trails you do — and we know how frustrating it is when your light doesn’t hit where it should. Through testing, trail riding, and real-world rider feedback, we engineered a solution that gives you more usable light exactly where you need it. If you already have an S1 on your bike, this is a no-brainer upgrade for technical terrain. If you're new to the S1 altogether, now’s a great time to see what this compact powerhouse can really do — especially with a beam pattern designed specifically for Moto.

Baja Designs, The Scientists of Lighting is proud to announce lighting solutions for the 2025 Toyota 4Runner. From fog pocket light kits, A-Pillar LED light kits to the TRD Pro/Trailhunter grille light replacement kit, these LED offroad lighting kits are perfect for those looking to start their build and add more trail-specific lighting to their new 6th-gen 4Runner. All kits include the necessary hardware for a quick and clean installation. Backed by our 30-Day Satisfaction Guarantee and Lifetime Limited Warranty for the ultimate in purchase protection. FOG POCKET LED LIGHT KITS The Baja Designs S2 Sport fog light replacement kit for the 2025 Toyota 4Runner (non-TRD Pro) has been designed to replace your factory fog lights while maintaining the OEM fit and finish. This premium LED lighting kit is configured with four S2 Sports offering 1,581 raw lumens each to illuminate zones 1 and 2 in front of your vehicle makes this the perfect trail ready solution. Included within the kit is mounting brackets, mounting hardware and splitter harnesses that allow use of the stock switch. All Baja Designs lights are backed by our 30-day satisfaction guarantee and lifetime limited warranty for the ultimate in purchase protection. NOTE: This kit will NOT work on TRD Pro models.Specifications (Per Light):Lumens: 1,581Wattage/Amps: 12.4W / 0.9A The Baja Designs S2 SAE fog light replacement Kit for the 2025 Toyota 4Runner (non TRD-Pro) has been designed to light up the road and trail to differentiate your vehicle from the pack. This kit includes our next generation S2 SAE road legal fog lights designed to meet SAE J583 fog lamp requirements, allowing for a highly controlled light pattern with a sharp cutoff. It’s this cutoff that makes this kit an ideal choice for driving through dust, fog, and inclement weather, on road or off the beaten path. The S2 SAE is equipped with aspheric projector optics, advanced LED technology, and impressive output that make it the perfect road-legal auxiliary fog light delivering an impressive 1,210 lumens per light with an output reaching up to 5712 candela (measured) at just 12.42W.   *NOTE: uService® is NOT a feature of all SAE products. If tampered, it will void the warranty. Our Limited Lifetime Warranty is valid only if sent back for repairs. NOTE: This kit will NOT work on TRD Pro models.Specifications (Per Light):Lumens: 1,210Wattage/Amps: 12.4W / 0.9A S8 10"/S2 Pro Grille LED Light Kit - TRD Pro/Trailhunter Edition The Baja Designs Grille Light Kit for the 2025 Toyota 4Runner TRD Pro and Trailhunter editions offers a powerful lighting solution tailored for off-road adventures. This kit is offered in clear or baja amber, allowing enthusiasts to upgrade their factory lighting on the TRD Pro grille. Featuring a 10-inch S8 light bar that delivers 6,324 raw lumens, along with two S2 Pro LED light pods, each producing 2,245 raw lumens. Together, these lights provide excellent illumination across lighting zones 1-4, ensuring optimal visibility in various conditions.With dual independent wiring harnesses, the S8 light bar and the S2 Pro light pods can be controlled separately for enhanced functionality. The S8 light bar illuminates lighting zones 3-4 for greater distance down the trail, while its amber backlight adds a stylish marker light for increased visibility when the main lights are off. For near-field visibility, the S2 Pros, equipped with a wide cornering, light up zones 1-2, ensuring comprehensive coverage close to the vehicle. This compact yet high-performance kit is designed to enhance both functionality and aesthetics. It includes everything you need for a seamless installation on the 2025 Toyota 4Runner TRD Pro grille—lights, mounting brackets, wiring harnesses, and more. Please note: This kit is designed exclusively for the Toyota Tacoma TRD Pro grille. Some trimming is required, please see instructions.S8 Specifications (Per Light):  Lumens: 6,324 57.9W / 4.2 S2 Pro Specifications (Per Light):  Lumens: 2,245 23.4W / 1.7A  A-Pillar KitsThe Baja Designs A-Pillar LED light kits for the 2025 Toyota 4Runner are for enthusiasts who need more visibility at night while on the trails. This comprehensive two-light kit has been expertly designed with a set of lights that complement the lines of the new 4Runner. Mounting brackets, toggle harness and all essential components come standard in the kit, ensuring a seamless installation process. A-Pillar LED Lights improve visibility, safety, and off-road capability offering enthusiasts additional illumination and expanded field of view that helps see hazards or obstacles while on the trail.Multiple Kits offered: Squadron Sport, Squadron Pro, XL Sport, XL Pro, XL80, LP4 ProKits come with all necessary mounting hardwareWiring Harness included sPOD Power Management SystemsThe sPOD power management solutions for the new Toyota 4Runner gives enthusiasts the ability to take control of your power accessories with an all-in-one unit. The connect-and-go systems have been designed to fit seamlessly into your vehicle and come in multiple configurations to fit your needs.  From our 6-switch Mini6 SourceLT system to our 8-switch HD and touchscreen BantamX systems allows you power management when you need it.Multiple Kits offered: Touchscreen/BantamX, HD/BantamX, Mini6/SourceLTAll systems come with mounting brackets, wiring harness and all necessary mounting hardware  SHOP ALL 2025 TOYOTA 4RUNNER SOLUTIONS Be sure to keep your eyes open for the next wave of Baja Designs light kits specifically for the 2025 Toyota 4Runner at www.bajadesigns.com

Seven-time Supercross Champion Jeremy McGrath and FIA Rallycross Champion Liam Doran engage in a nighttime off-road race through Johnson Valley, California. They compete to reach Café 247 first, with the loser buying the meal. The race showcases their driving skills and the performance of their Baja Designs lights in challenging desert terrain. The Race is On! https://youtu.be/aHNrrKKzeZs?si=D9F4xIhSRCI1oDSr WHICH TEAM ARE YOU? SHOP KAWASAKI TERYX KRX 1000 LIGHT KITS SHOP POLARIS RZR PRO R LIGHT KITS The Destination: Cafe 247 A destination eatery in the middle of the desert in Lucerne Valley, Cafe 247 is the premiere destination for offroaders wanting the "best hamburger on the planet" including the jalapeno bacon ranch burger and the bacon cheeseburger. A hidden gem in the desert,  Cafe247 is a lively place to enjoy a meal, with bands playing on the weekends, offering a memorable experience. A favorite of our two racers! Photo Gallery

When it comes to all out fun and adventure, Tyler Enyedi from Ridgefield, WA took a brand-new Can-Am Maverick X3 straight from the showroom to Magnum offroad in Vista, CA and told them to give his new toy the works.  No expense was spared, as Tyler’s Maverick X3 was transformed into a trail monster. Let’s take a closer look and see just what makes @the_loam_woodsman Can-Am a beast on the trail. Magnum Offroad took eight months to transform the stock Maverick X3 into this piece of art. Outfitting this vehicle with the best from the industry such as Fifty6 boxed trailing arms producing 24 inches of travel, ZRP billet uprights, hubs, and trailing arm braces. Magnum offroad also added their custom radius rod plate. Fox Factory 3” rear shocks with SDG full valve tune package wrapped in Eibach dual rate coils keep the rear of this X3 planted in the whoops. Method Bead Lock rims are wrapped in 35" Tensor DSR tires providing max traction on the trails. Tyler went for the more reliable approach when building his motor, with a tune from Treal Performance and a custom Magnaflow exhaust system that keeps this machine moving forward. The Baja Designs lighting package that Tyler chose allows him unparalleled visibility during nighttime and lo-light conditions. Up front on the bumper are three XL80s with baja amber rock guards, Squadron Sports on the A-pillar, 7 XL Sports aligned on the roof rack each with clear rock guards for protection, red rock lights are on all four corners along with a set of dome lights in the cab. An RTL light bar is fitted out back as a chase light. The cabin has also been given the gold star treatment with a carbon fiber dash, a 7-inch Motec display, Lowrance and Garmin GPS units for navigation, PCI radios for communication between driver and passengers. Tyler looked to PRP for creature comforts and safety, as he installed a PRP steering wheel with PTT and PRP seats and 5-pt belts keep both the driver and passengers safe while bashing the trails. You can see Tyler hitting the dirt at UTV takeovers. As he explains, "One of the best trips of the year is UTV Takeover. All locations this event is held are epic. from the participants, the positive energy and stoke level around the UTV market makes these events some of the most fun" While UTV takeovers are where the stoke level is high, his go-to spot in the PNW is Coos Bay. "From easy camping to dune rides to the ocean, you simply can't beat it up here in the PNW", explains Tyler. Ready to Conquer Any Challenge Tyler Enyedi's 2021 Can-Am Maverick X3 RR Max exemplifies a harmonious blend of performance, safety, and aesthetics. The integration of Baja Designs' top-tier lighting solutions, combined with strategic performance upgrades, transforms this UTV into a formidable machine, ready to conquer any off-road challenge. Lights Used On Tyler's Build: Quick View XL80 LED Auxiliary Light Pod Pair Universal Starting At:$813.95 The Baja Designs XL80 auxiliary LED light pair elevates your off-road lighting with superior visibility and brightness. Equipped with our trademarked... Quick View Squadron Sport Black LED Auxiliary Light Pod Pair Universal Starting At:$249.95 Upgrade your light package with the Squadron Sport LED light pair from Baja Designs. Don’t let the compact size of these 3” light... Quick View RTL LED Rear Light Bar Universal $489.95 Improve safety during your off-road adventures or races with the Baja Designs RTL, or Rear Tail Light, offering enhanced visibility at the rear... Quick View LED Rock Light Kit Universal $344.95 Our Universal Rock Light Kit takes the guess work out of buying wiring and trying to figure out how to pin relays. All of the lengths are pre-cut... Quick View LED Dome Light with Switch Universal $77.95 These LED lights are waterproof and can be mounted virtually anywhere. All that is needed is 12 volt power. They have a 180 degree optic to illuminate... Quick View XL Single Rock Guard Universal $10.95 The Baja Designs XL Series rock guards provide essential protection for your XL Sport, XL Pro, XL Racer, and XL80 LED lights, shielding them... Quick View Squadron Single Rock Guard Universal $9.95 The Baja Designs Squadron Series rock guard provides essential protection for your Squadron Sport, Pro, and Racer LED lights, shielding them... Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick Tyler Enyedi 2021 Can-Am Maverick

What's it take to win the Baja 1000? Among many other things, a dialed lighting package is essential to take on the most grueling desert racing on the planet. One thing we are extremely proud of at Baja Designs is that the lighting solutions we offer to you are the same exact ones that are used by Baja Champions, but buying our lights is only the first step in building out a lighting package to win in Baja. Building out a lighting package for race applications is not just about “more”, you need to understand what each light is designed for and where the light needs to land in your field of view. This is why we’ve created Lighting Zones and Effective Lighting Score to help enthusiasts and racers alike understand the Science of building out a lighting solution for any application. Once you understand the Science, your preference is the final deciding factor in your Lighting Package. Working with the Vildosola Racing team, of Tavo Vildosola and Jason McNeil, this is the lighting package we built out for their Trophy Truck to take on the 2024 Baja 1000. The front grill is a 50” OnX6+, 4 XL80s and 6 XL Racers, illuminating (Zones 3, 4, 5) For dust, the only amber on the truck is the XL80 with Wide Cornering lens and XL Pro with Combo lens in each headlight location (Zones 2 and 3) On the A-pillar, for effective ditch lighting, XL Pros with Wide Cornering lenses (Zone 2) On the roof, their main distance lighting is 12 XL Racers on an light actuator (Zone 5) For marker lights, so their pit crews can identify them, they’re utilizing 2 S2 Sports and 1 S2 Pro with Green, Clear, and Red lenses

Baja Designs announces the S1 LED headlight kit for the popular Super73 e-bikes. This kit offers a substantial upgrade from the stock headlight that comes on the Super73, providing more visibility at night along with better daytime safety.  We have paired this headlight kit with our S1 LED light that offers 2,320 raw lumens to light up the trails and the included direct plug-n-play connector ensures the light to be powered by the stock battery.   Features:S1 light offers 2,320 lumensPlug ‘n Play connector allows light to be powered by stock batteryMounting Bracket makes for simple installationLifetime Limited WarrantyKit Includes(1x) S1 Wide Cornering LEDs Clear or Amber(1x) Mounting bracketAll necessary hardwareS1 Specifications:Lumens: 2,32019.5W/1.42APrice: $219.95 Take control of your next ride on your Super73 with the S1 LED Headlight kit from Baja Designs. With a quick installation process, this is a worthy upgrade to your stock e-bike that offers safety when you ride.  To order your kit today, visit our product page HERE. 

Baja Designs and sPOD have expanded their offerings for the popular 2024-on Toyota Tacoma platform, giving enthusiasts more options when it comes to customizing their vehicle build for the trails. Bed Rail Cargo Light KitThe Baja Designs bed rail cargo light kit for the 2005-2024 Toyota Tacoma and 2007-2024 Toyota Tundra models offer a significant upgrade to the lighting in the bed of your truck. This kit includes four small rock lights providing 400 lumens each that mount on hangers from the stock utility track mounting points. Wiring harness and all the necessary mounting hardware is included for a quick and easy installation. Bed Light Cargo Kit: (4x) White or Red Rock Lights  (1x) Toggle Switch Wiring Harness(1x) 10’ Extension Harness  (4x) Mounting Bracket All necessary hardwareSpecifications (Per Light):Lumens: 400Wattage/Amps: 5.52W / 0.4A SHOP NOW The Baja Designs S1 Vent kit for the 2024-on Toyota Tacoma provides an OEM-style solution that adds light to the side vents under the headlights. This kit comes with two S1 lights each producing 2,320 lumens illuminating zones 1-2 and vent mounting plates that replaces the stock plastic part. Wiring harness and all the necessary mounting hardware is included for a quick and easy installation. COMING SOON sPOD has introduced two new power management kits for the 2024+ Toyota Tacoma. The touchscreen/Bantam system is ideal for those who want to match the Tacoma’s in-cabin LCD display, while the simple and efficient SourceLT/Min6 offers enthusiasts extra channels to enhance the factory auxiliary switches. The sPOD BantamX Touchscreen Vehicle-Specific Kit for the 2024+ Toyota Tacoma is designed to seamlessly integrate the sPOD Touchscreen control panel into the vehicle’s cabin, providing a centralized and convenient place for accessory controls. This kit fits all Toyota Tacoma trim models, ensuring easy access to controls within arm’s reach.The BantamX power module offers eight power circuits, each supporting 30A per channel, 100A total.sPODConnect™ Bluetooth technology allow users to program and control their accessories from any iOS or Android device via the sPOD app.Integrated LVCO™ low-voltage cutoff battery protection that monitors and protects, ensuring your vehicle’s electrical system remains reliable and secure.Input Control - full control over accessories, allowing to integrate factory wiring to take control a step further.5-year manufacturer’s warranty The BantamX Touchscreen setup includes the following: (1x) BantamX System  (1x) 36” Battery Cable Set  (1x) Touchscreen Switch Panel (1x) Ethernet Cable (1x) Mounting Bracket All necessary hardware  SHOP NOW For those looking for a simple, straightforward power management system the sPOD SourceLT/Mini6 Vehicle-Specific Kit for the 2024-on Toyota Tacoma is the answer. Designed to seamlessly integrate the sPOD Mini6 control panel into the vehicle’s cabin, this kit fits all Toyota Tacoma trim models ensuring easy access to controls within arm’s reach.The SourceLT power module offers six power circuits, each supporting 30A per channel, 100A total.sPODConnect™ Bluetooth technology allow users to program and control their accessories from any iOS or Android device via the sPOD app.Integrated LVCO™ low-voltage cutoff battery protection that monitors and protects, ensuring your vehicle’s electrical system remains reliable and secure.5-year manufacturer’s warranty COMING SOON

Let the good times roll with a full line of Baja Designs lighting solutions for the 2020-2024 Kawasaki Teryx KRX 1000 sport UTV.  These kits are engineered to cover all lighting zones and offer a level of daytime safety and nighttime visibility while extending the ride times well after the sun goes down. All kits come with everything you need for quick and simple installation. Backed by our 30-Day Satisfaction Guarantee and limited lifetime warranty for the ultimate in purchase protection.2020-2024 Kawasaki Teryx KRX Roof Kits (Available Now)Upgrade your Kawasaki Teryx KRX 1000 with Baja Designs roof bar lighting kits. Choose from the S8 40-inch Roof Bar Kit, the OnX6+ 40-inch roof bar kit or the 7XL Linkable Rood bar kit, which are all designed to deliver exceptional lighting performance in a sleek package. All roof bar kits offer excellent visibility utilizing next generation LEDs that ensure you stand out both in terms of style and trail visibility.The S8 Roof bar kit provides light that allows for a wider and longer beam pattern that makes it easier to see further ahead on the trails, aiding in driver safety at night and low light conditions. The amber backlight feature of the S8 adds a stylish touch to an enthusiast’s vehicle and can be used as a marker for added visibility when your main lights are not needed.The OnX6+ roof bar kit delivers powerful, efficient performance with adjustable vertical positioning for the perfect beam pattern from the high-speed spot reflectors and next-generation LED technology. Built with mil-spec aluminum housing, it is rugged enough to withstand the harshest conditions.The 7XL Linkable roof bar kit offers 45 degrees of vertical pitch adjustment for each of the 7 light pods or the entire light bar, and independent horizontal adjustments for straight or arc configurations that offer enthusiasts full control over the light spread, ensuring a perfect fit with the lines of the KRX 1000. 2020-2024 Kawasaki Teryx RTL Kits (Available Now)Boost the safety and visibility of your Kawasaki Teryx KRX 1000 with the Baja Designs RTL Rear Taillight Kit. Designed for off-road adventures, this kit ensures you're seen by others, even in dusty conditions, enhancing safety on the trails. With standard and race-legal configuration options available, the RTL light bar delivers superior rear visibility, so you can lead the pack with confidence.The kit includes the RTL light bar, mounting brackets, a wiring harness, and all components needed for a seamless installation, ensuring you're ready for the trail. Backed by a 30-day satisfaction guarantee and a lifetime limited warranty, this kit offers reliable performance and peace of mind.Key Features:Different RTL variations depending on customer needsOffering a clearer brake light over oem taillightsTurn signal variant offers enhanced safety and visibility from the rear of the vehicle 2020-2024 Kawasaki Teryx KRX 1000 A-Pillar Kits ( Pre-Order - Available 11/28) Maximize your trail visibility with the Baja Designs A-Pillar LED light kits, specifically designed for the Kawasaki Teryx KRX 1000. These powerful off-road LED light kits ensure illumination for even the darkest trails, enhancing safety and performance. Enthusiasts can select from a series of lights, starting with our XL Sport and Pro models, to stepping up to the high-powered XL80 and LP4 Pro models.A-Pillar light kits offer enhanced visibility by illuminating the areas directly beside the vehicle. This is especially helpful in seeing hazards such as rocks, ditches, animals, or any other obstacle that can become a danger. Versatility is also an advantage of A-Pillar light kits, as they can be adjusted or angled to provide focused light where it’s needed most. The kit comes complete with mounting brackets, a wiring harness, and all the essential components for a hassle-free installation, so you can get back to the trails faster.  2023-2024 Kawasaki Teryx KRX 1000 Headlight Kits ( Pre-Order - Available 11/28) Upgrade your lighting with the Baja Designs S1 Headlight Kit for the 2023-2024 Kawasaki Teryx KRX 1000.  With two kits to choose from, each kit utilizes the S1 LED lights with a focused beam pattern to illuminate everything in your path. The improved visibility from the S1 lights offer brighter and clearer illumination of the trails ahead, which allows for navigating rough terrain and spotting hazards well ahead of time in low-light conditions. For those looking at the ultimate headlight kit, the S1 "Unlimited" comes with one S1 laser per side to offer a tight beam for unparalleled distance illumination. Both headlight kits provides increased safety over the stock headlights, allowing drivers to see further and wider increasing reaction time to unexpected hazards. Headlight kits include a plug-and-play harness, mounting brackets, and all necessary components for a seamless installation, allowing you to hit the trail faster.The Kawasaki Teryx KRX 1000 are built for the roughest trails and is a game changer in the world of sport UTVs. By adding a set of Baja Designs lighting kits, you transform an already capable UTV that's ready to push the limits on the trail, day and night. Shop the full collection of lighting solutions for the kawasaki Teryx KRX 1000 today at www.bajadesigns.com and light up your adventure! SHOP NOW