2025 Toyota Tacoma Archives - Baja Designs - Off-Road LED & Laser Lights | Automotive, Jeep, Truck, UTV, ADV, Dirtbike

test

Fitment: 2025 Toyota Tacoma

S2 SAE OEM Fog Light Replacement Kit – 2024-2026 Toyota Tacoma Pro/Trailhunter

The Baja Designs S2 SAE Fog Light replacement Kit for the 2024-on Toyota Tacoma TRD Pro/Trailhunter models are designed to light up the road and trail to differentiate your vehicle from the pack. This kit includes our next generation S2 SAE road legal fog lights designed to meet SAE J583 fog lamp requirements, allowing for a highly controlled light pattern with a sharp cutoff. It’s this cutoff that makes this kit an ideal choice for driving through dust, fog, and inclement weather, on road or off the beaten path. The S2 SAE is equipped with aspheric projector optics, advanced LED technology, and impressive output that make it the perfect road-legal auxiliary fog light delivering an impressive 1,210 lumens per light with an output reaching up to 5712 candela (measured) at just 12.42W. This is a comprehensive kit that comes with everything you need for a quick installation and does not require any additional parts. Backed by our 30-day satisfaction guarantee and limited lifetime warranty* for the ultimate in purchase protection. *NOTE: uService® is NOT a feature of all SAE products. If tampered, it will void the warranty. Our Limited Lifetime Warranty is valid only if sent back for repairs.

S2 SAE setup includes the following:

  • (4x) S2 SAE, Clear or Baja Amber
  • (2x) Mounting Brackets
  • (2x) Adapter Harness
  • All necessary hardware
  • NOTE: This kit fits the TRD Pro/Trailhunter models only.

Specifications (Per Light):

  • Lumens: 1,210
  • Wattage/Amps: 12.4W / 0.9A

The Baja Designs Advantage:

  • Satisfaction Guarantee – 30-Day Money Back Guarantee
  • Limited Lifetime Warranty – Complete Purchase Protection
  • ClearView – All The Light, Right Where You Need It
  • MoistureBlock – Waterproof, Rain Proof, Submersible
  • CopperDrive – Safely Driving LEDs at 100%
  • 5000K Daylight – Less Driver Fatigue, Natural Color

S2 Sport OEM Fog Light Replacement Kit – 2024-2026 Toyota Tacoma Pro/Trailhunter

The Baja Designs S2 Sport Fog light replacement kit for the 2024-on Toyota Tacoma TRD Pro/Trailhunter models are designed to replace your factory fog lights while maintaining the OEM fit and finish. This premium LED off-road lighting kit is configured with four S2 Sports offering 1,581 raw lumens each to illuminate zones 1 and 2 in front of your vehicle makes this the perfect trail ready solution. Included within the kit is mounting brackets, mounting hardware and splitter harnesses that allow use of the stock switch. All Baja Designs lights are backed by our 30-day satisfaction guarantee and lifetime limited warranty for the ultimate in purchase protection.

ELS™ Scores:
Click to learn more about our Effective Lighting Score (ELS)
S2 Sport Wide Cornering: ELS 72⁰/ 7.1/ 80’/ 1112 

Kit Includes:

  • (4x) S2 Sport – Wide Cornering; Clear or Baja Amber
  • (2x) Mounting Brackets
  • (2x) Adapter Harness
  • All necessary hardware
  • NOTE: This kit fits the TRD Pro/Trailhunter models only.

Specifications (Per Light):

  • Lumens: 1,581
  • Wattage/Amps: 12.4W / 0.9A 

The Baja Designs Advantage:

  • Satisfaction Guarantee – 30-Day Money Back Guarantee
  • Limited Lifetime Warranty – Complete Purchase Protection
  • uService – Replaceable Lenses and Optics
  • ClearView – All the Light, Right Where You Need It
  • MoistureBlock – Waterproof, Rain Proof, Submersible
  • CopperDrive – Safely Driving LEDs at 100%
  • 5000K Daylight – Less Driver Fatigue, Natural Color

Toyota S8 10″ Light Bar / S2 Pro TRD Pro Grille Conversion Light Kit – 2024-2026 Toyota Tacoma

The Baja Designs Grille Conversion Light Kit for the 2024-on Toyota Tacoma offers enthusiasts a powerful lighting solution tailored for off-road adventures. This kit is for those that have done the TRD Pro Grille conversion to their stock Tacoma, and is offered in clear or baja amber allowing enthusiasts to add a light system to the grille. Featuring a 10-inch S8 light bar that delivers 6,324 raw lumens, along with two S2 Pro LED light pods, each producing 2,245 raw lumens. Together, these lights provide excellent illumination across lighting zones 1-4, ensuring optimal visibility in various conditions.

With dual independent wiring harnesses, the S8 light bar and the S2 Pro light pods can be controlled separately for enhanced functionality. The S8 light bar illuminates lighting zones 3-4 for greater distance down the trail, while its amber backlight adds a stylish marker light for increased visibility when the main lights are off. For near-field visibility, the S2 Pros, equipped with a wide cornering, light up zones 1-2, ensuring comprehensive coverage close to the vehicle.

This compact yet high-performance kit is designed to enhance both functionality and aesthetics. It includes everything you need for a seamless installation on the 2024 Toyota Tacoma TRD Pro grille—lights, mounting brackets, wiring harnesses, and a bracket that re-mounts the front grille mounted camera. Featuring Baja Designs’ innovative uService® technology, you can easily swap or replace lenses and adjust beam patterns without voiding the warranty, giving you full control over your lighting setup.

Backed by a 30-day satisfaction guarantee and a lifetime limited warranty, this kit ensures reliable performance and peace of mind. Please note: This kit is designed for those that have done the Tacoma TRD Pro grille conversion. Some trimming is required, please see instructions.

NOTE: For those looking to take advantage of OEM auxiliary switches, consider adding the Upfitter harness (600101) for the 2024 Toyota Tacoma. This option allows you to wire your lights into the factory auxiliary switches, providing a clean look while utilizing the stock controls for your powered accessories.

Key Features:

  • Designed for Tacoma owners looking to upgrade to the TRD Pro grille style
  • Includes the bracket necessary for mounting the front grille mounted camera
  • Powerful Lighting: Includes a 10-inch S8 light bar (6,324 lumens) and two S2 Pro LED light pods (2,245 lumens each), providing excellent illumination across lighting zones 1-4.
  • Dual Functionality: Independent wiring harnesses allow separate control of the S8 light bar and S2 Pro pods for versatile lighting options.
  • Wide Coverage: The S8 light bar covers zones 3-4 for long-distance visibility, while the S2 Pro pods in wide cornering pattern illuminate zones 1-2 for close-range lighting.
  • Amber Backlight: Adds a stylish marker light for improved visibility when the main lights are not in use.
  • Easy Installation: Complete kit includes lights, mounting brackets, wiring harnesses, and all necessary components for a smooth installation on the 2024 Toyota Tacoma TRD Pro grille.
  • uService® Technology: Easily swap lenses and adjust beam patterns without voiding the warranty.
  • Durability and Reliability: Backed by a 30-day satisfaction guarantee and lifetime limited warranty for long-lasting performance.

Kit Includes:

  • (1x) S8 10-inch LED Light Bar – Driving Combo, Clear or Baja Amber
  • (2x) S2 Pro LED Lights – Wide Cornering, Clear or Baja Amber
  • (1x) Camera Adapter
  • (4x) Mounting Bracket
  • (2x) Wiring Harness
  • (1x) S8, Backlit Add-on Harness
  • All Necessary Mounting Hardware

S8 Specifications (Per Light):

  • Lumens: 6,324
  • 57.9W / 4.2

S2 Pro Specifications (Per Light):

  • Lumens: 2,245
  • 23.4W / 1.7A

– 2024-2026 Toyota Tacoma

The sPOD BantamX Touchscreen Vehicle-Specific Kit for the 2024-on Toyota Tacoma is designed to seamlessly integrate the sPOD Touchscreen control panel into the vehicle’s cabin, providing a centralized and convenient place for accessory controls. The touchscreen/Bantam system is ideal for those who want to match the Tacoma’s in-cabin LCD display, and fits all Toyota Tacoma trim models ensuring easy access to controls within arm’s reach.

  • The BantamX power module offers eight power circuits, each supporting 30A per channel, 100A total.
  • sPODConnect™ Bluetooth technology allow users to program and control their accessories from any iOS or Android device via the sPOD app.
  • Integrated LVCO™ low-voltage cutoff battery protection that monitors and protects, ensuring your vehicle’s electrical system remains reliable and secure.
  • Input Control – full control over accessories, allowing to integrate factory wiring to take control a step further.

The BantamX Touchscreen setup includes the following: 

  • (1x) BantamX System
  • (1x) 36” Battery Cable Set
  • (1x) Touchscreen Switch Panel 
  • (1x) Ethernet Cable 
  • (1x) Mounting Bracket 
  • All necessary hardware 

Mini6 SourceLT Power Management Vehicle Kit – 2024-On Toyota Tacoma

For those looking for a simple and efficient power management system the sPOD SourceLT/Mini6 Vehicle-Specific Kit for the 2024-on Toyota Tacoma is the answer. Designed to seamlessly integrate the sPOD Mini6 control panel into the vehicle’s cabin, offering 6 channels to control your powered accessories, offering enthusiasts extra channels to enhance the factory auxiliary switches. This kit fits all Toyota Tacoma trim models, ensuring easy access to controls within arm’s reach.

  • The SourceLT power module offers six power circuits, each supporting 30A per channel, 100A total.
  • sPODConnect™ Bluetooth technology allow users to program and control their accessories from any iOS or Android device via the sPOD app.
  • Integrated LVCO™ low-voltage cutoff battery protection that monitors and protects, ensuring your vehicle’s electrical system remains reliable and secure.

The SourceLT/Mini6 setup includes the following: 

  • (1x) SouceLT System
  • (1x) 36” Battery Cable Set
  • (1x) Mini6 Switch Panel 
  • (1x) Ethernet Cable 
  • (1x) Mounting Bracket 
  • All necessary hardware

Toyota S1 Vent Kit – 2024-2026 Toyota Tacoma

The Baja Designs S1 Vent kit for the 2024-on Toyota Tacoma provides an alternative lighting solution separate from the fog lights or grille kits. This comprehensive kit comes with two of our powerful S1 LED lights, each producing 2,320 lumens illuminating zones 1-4 and vent mounting plates that replace the factory plastic parts. Wiring harness and all the necessary mounting hardware are included for a quick and easy installation.  

Includes:

  • (2x) S1 Lights – Clear Wide Cornering
  • (2x) Replacement Vent Mounting Plates
  • (1x) Wiring Harness
  • All necessary mounting hardware

S1 Specifications (Per Light):

  • Lumens: 2,320
  • Wattage/Amps: 20W / 1.42A

Toyota Bed Rail Cargo Light Kit – 2005-On Toyota Tacoma; 2007-On Toyota Tundra

The Baja Designs bed rail cargo light kit for the 2005-2024 Toyota Tacoma and 2007-2024 Toyota Tundra models offer a significant upgrade to the lighting in the bed of your truck. This kit includes four small rock lights providing 400 lumens each that mount on hangers from the stock utility track mounting points. Wiring harness and all the necessary mounting hardware is included for a quick and easy installation. Backed by our 30-day Satisfaction Guarantee and Lifetime Limited Warranty for the ultimate in purchase protection.

Includes: 

  • (4x) White or Red Rock Lights
  • (1x) Toggle Switch Wiring Harness
  • (1x) 10’ Extension Harness
  • (4x) Mounting Bracket 
  • All necessary hardware

Rock Light Specifications (Per Light):

  • Lumens: 400
  • Wattage/Amps: 5.52W / 0.4A

BantamX Upfitter Power Management Vehicle Kit – 2024-2026 Toyota Tacoma

The BantamX Upfitter system for the 2024-on Toyota Tacoma is specifically engineered to integrate with the factory upfitter switches. This  Connect&Go™ system is designed to mount seamlessly into the engine bay, offering 8 power circuits each delivering 30A per channel, 100A total to power your accessories. This kit upgrades your stock switches by increasing the amp rating to a consistent 30A across the OEM channels, while providing five extra channels for upgradability. Added control from the built-in Bluetooth technology allows enthusiasts to control all channels wirelessly from any iOS or Android device, unlocking a wide range of programming options such as output dimming, strobing, flashing, auto power-up, momentary settings, switch linking and more, sPOD allows simple and safe power management that is worry-free, allowing you to take control.

Key Features:

  • Use your OEM upfitter switches to trigger the BantamX
  • Increase amp rating across the OEM switches to 30A
  • Gain five extra switches with the BantamX
  • Bluetooth functionality through the sPOD app; output dimming, strobing, flashing, auto power-up, momentary settings, switch linking and more
  • You don’t need to run a controller cable through the vehicle firewall
  • 5-year* manufacturer warranty

What’s Included:

  • (1x) BantamX System
  • (1x) 84” Battery Cable Set
  • (1x) HD Switch Panel
  •  
  • (1x) Mounting Bracket
  • All Necessary Hardware

BantamX Specs:

  • 8 circuits rated at 30A each, 100A total
  • 16-position terminal block
  • Low-voltage cutoff battery protection with optional override
  • 100A in-line fuse
  • Operates on 12V or 24V DC
  • Built-in Bluetooth for app control
  • Supports system expansion up to 32 channels
  • Two controller ports for multi-controller compatibility
  • Power-saving deep sleep mode

HD/BantamX Power Management Vehicle Kit – 2024-2026 Toyota Tacoma

The sPOD BantamX HD vehicle-specific kit is designed to seamlessly integrate the sPOD HD control panel into the 2024-on Toyota Tacoma, giving you easy access to all your controls right from the cabin. With 8 circuits of power, each rated at 30A (100A total), this system provides reliable power management for all your vehicle’s accessories. The BantamX offers system scalability, with the ability to expand up to 32 channels, all controlled by a single controller.

Equipped with built-in Bluetooth technology, the sPOD BantamX allows you to program and control your accessories remotely from any iOS or Android device via the sPOD app. A wide range of programming options is available, including dimming, strobing, flashing, memory settings, switch linking, and more, giving you full customization over your electrical system.

For added convenience, the sPOD HD smart panel brings control right to your fingertips, with an adjustable RGB backlight to match your cabin’s aesthetic. Installation is a breeze, requiring only a single ethernet cable to connect the BantamX unit to the touchscreen in your cab—no relays, wiring looms, or circuit fuses needed.

The system also includes built-in battery protection with an integrated low-voltage cutoff (LVCO) to monitor and protect your vehicle’s electrical system, ensuring safe and reliable performance.

Backed by a 5-year manufacturer warranty, the sPOD BantamX HD system delivers safe, simple power management that puts you in control.

 

Key Features:

  • Seamless Integration: Installs effortlessly into the 2024 Toyota Tacoma, providing easy access to all accessory controls.
  • Powerful Circuit Management: Features 8 circuits (30A per circuit, 100A total) for powering your accessories.
  • Bluetooth Connectivity: Built-in Bluetooth for remote programming and control via the sPOD app on iOS or Android.
  • Extensive Programming Options: Includes features like dimming, strobing, flashing, memory, switch linking, and more.
  • Easy Installation: A single ethernet cable connects the BantamX to the touchscreen—no relays, looms, or circuit fuses required.
  • Battery Protection: Integrated low-voltage cutoff (LVCO) ensures safe operation of your vehicle’s electrical system.
  • Scalable System: Expandable up to 32 channels controlled by one controller, offering future flexibility.
  • Adjustable RGB Backlighting: Customize the backlit colors of the HD smart panel for a personalized touch.
  • Multi-Controller Compatibility: Supports up to two controllers for added versatility.

What’s Included:

  • (1x) BantamX System
  • (1x) 84” Battery Cable Set
  • (1x) HD Switch Panel
  • (1x) Ethernet Cable
  • (1x) Mounting Bracket
  • All Necessary Hardware

BantamX Specs:

  • 8 circuits rated at 30A each, 100A total
  • 16-position terminal block
  • Low-voltage cutoff battery protection with optional override
  • 100A in-line fuse
  • Operates on 12V or 24V DC
  • Built-in Bluetooth for app control
  • Supports system expansion up to 32 channels
  • Two controller ports for multi-controller compatibility
  • Power-saving deep sleep mode

S8 10-inch/S2 Pro Grille Light Kit – 2024-2026 Toyota Tacoma; TRD Pro

Baja Designs introduces the Grille Light Kit for the 2024-on Toyota Tacoma TRD Pro, offering a powerful lighting solution tailored for off-road adventures. This kit is offered in clear or baja amber, allowing enthusiasts to replace or add a light system to the TRD Pro grille. Featuring a 10-inch S8 light bar that delivers 6,324 raw lumens, along with two S2 Pro LED light pods, each producing 2,245 raw lumens. Together, these lights provide excellent illumination across lighting zones 1-4, ensuring optimal visibility in various conditions.

With dual independent wiring harnesses, the S8 light bar and the S2 Pro light pods can be controlled separately for enhanced functionality. The S8 light bar illuminates lighting zones 3-4 for greater distance down the trail, while its amber backlight adds a stylish marker light for increased visibility when the main lights are off. For near-field visibility, the S2 Pros, equipped with a wide cornering, light up zones 1-2, ensuring comprehensive coverage close to the vehicle.

This compact yet high-performance kit is designed to enhance both functionality and aesthetics. It includes everything you need for a seamless installation on the 2024 Toyota Tacoma TRD Pro grille—lights, mounting brackets, wiring harnesses, and more. Featuring Baja Designs’ innovative uService® technology, you can easily swap or replace lenses and adjust beam patterns without voiding the warranty, giving you full control over your lighting setup.

Backed by a 30-day satisfaction guarantee and a lifetime limited warranty, this kit ensures reliable performance and peace of mind. Please note: This kit is designed exclusively for the Toyota Tacoma TRD Pro grille. Some trimming is required, please see instructions.

NOTE: For those looking to take advantage of OEM auxiliary switches, consider adding the Upfitter harness (600101) for the 2024 Toyota Tacoma. This option allows you to wire your lights into the factory auxiliary switches, providing a clean look while utilizing the stock controls for your powered accessories.

 

Key Features:

  • Powerful Lighting: Includes a 10-inch S8 light bar (6,324 lumens) and two S2 Pro LED light pods (2,245 lumens each), providing excellent illumination across lighting zones 1-4.
  • Dual Functionality: Independent wiring harnesses allow separate control of the S8 light bar and S2 Pro pods for versatile lighting options.
  • Wide Coverage: The S8 light bar covers zones 3-4 for long-distance visibility, while the S2 Pro pods in wide cornering pattern illuminate zones 1-2 for close-range lighting.
  • Amber Backlight: Adds a stylish marker light for improved visibility when the main lights are not in use.
  • Easy Installation: Complete kit includes lights, mounting brackets, wiring harnesses, and all necessary components for a smooth installation on the 2024 Toyota Tacoma TRD Pro grille.
  • uService® Technology: Easily swap lenses and adjust beam patterns without voiding the warranty.
  • Durability and Reliability: Backed by a 30-day satisfaction guarantee and lifetime limited warranty for long-lasting performance.

Kit Includes:

  • (1x) S8 10-inch LED Light Bar – Driving Combo, Clear or Baja Amber
  • (2x) S2 Pro LED Lights – Wide Cornering, Clear or Baja Amber
  • (4x) Mounting Bracket
  • (2x) Wiring Harness
  • (1x) S8, Backlit Add-on Harness
  • All Necessary Mounting Hardware

S8 Specifications (Per Light):

  • Lumens: 6,324
  • 57.9W / 4.2

S2 Pro Specifications (Per Light):

  • Lumens: 2,245
  • 23.4W / 1.7A