Jeep JL/JT LP6 Pro Bumper Light Kit – Jeep 2020-22 Gladiator; 2018-22 Wrangler JL

SKU: 447671UP
starting at:
$1,107.95 $0.00 $1,044.95 $0.00
SELECT YOUR VEHICLE*
PRODUCT OPTIONS

DESCRIPTION

This lighting and wiring setup has been tested on the Jeep JL / JT with the Rubicon Steel bumper to take the guess work out of installation! The wiring in this kit is specifically designed to run in conjunction with factory upfitter systems or sPOD / Switch Pros units. The LP6 Pro is a 6-inch powerhouse featuring a total of 10,300 lumens and a 200 degree spread of useable LED light. The LP6 features 8,600 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT). To keep your light performing at its highest potential, the LP6 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks – drastically improving cooling capacity and performance. With an amber day-time running light, low power, and high power mode, the LP6 will fulfill all your lighting needs.

Satisfaction Guarantee – 30-Day Money Back Guarantee

Limited Lifetime Warranty – Complete Purchase Protection

uService – Replaceable Lenses And Optics

ClearView – All The Light, Right Where You Need It

MoistureBlock – Waterproof, Rain Proof, Submersible

CopperDrive – Only LED Driven At 100 Percent

5000K Daylight – Less Driver Fatigue, Natural Color

FITS

2020-2022 Jeep Gladiator
2018-2022 Jeep Wrangler JL
Detailed Specs
Included with kit:

SKU: 270003

Specifications

Product Type LP6 Pro LED Light Pod
Description Driving/Combo; Clear
Beam Pattern Driving/Combo
Lens Color Clear
Lighting Modes High Beam/Low Beam/Day-Time Running Backlighting
Light Quantity 1
Lighting Type Forward Projecting
Lighting Technology LED
Lighting Quantity 6
Brightness (Lumens) 8,600
Wattage (W) 90
Amperage Rating (A) 6.5
Secondary Lighting Type Integrated Peripheral Technology (IPT)
Secondary Lighting Technology LED
Secondary Light Quantity 4 LEDs
Secondary Brightness (Lumens) 1,700
Secondary Wattage (W) 15
Secondary Amperage Rating (A) 1.0
Backlight Wattage (W) 4.14
Backlight Amperage Rating (A) 0.3
Terminal Type Mating Connector
Terminal Connector DT06-4S Deutsch
Average Rated Life (hr.) 49,930
Housing Color Black
Housing Material Hard Anodized Machined Aluminum
Lens Material Hardcoated Polycarbonate
Bezel Material Billet Machined Aluminum
Mounting Hardware Included Yes
Mounting Hardware Material Stainless Steel
Wiring Harness Included No
Overvoltage Protection Built-In
Universal or Specific Universal

Dimensions

Length (in.) 6.5
Height (in.) 6.5
Depth (in.) 3.2
Weight (lbs.) 4.2

Standards & Compliance

Standards/Compliance (Durability) Exceeds MIL-STD810G (Mil-Spec Testing)
Standards/Compliance (Water Resistance) IP69K (Waterproof up to 9ft & Pressure Washable)
Standards/Compliance (Impact Resistance) IK10 Compliant (Mechanical Impact Testing)
Installation Instructions
Disclaimer and Warning

Disclaimer

Buyer is responsible for ensuring that it uses the products (and its vehicle) in accordance with all applicable laws, regulations, guidelines, and standards of care. Buyer acknowledges that some products may only be used when off-roading, and Buyer will comply with all vehicle and road safety guidelines. Buyer is solely responsible for (and will indemnify and hold Bestop harmless for) any claims, losses, damages, fines, fees, costs, or other amounts arising out of Buyer’s non-compliance with these provisions.

Baja Designs California Proposition 65

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Show All Reviews

Sorry, this product doesn’t fit your vehicle.

Now that you have entered your vehicle you can browse for products to see ones that fit.  Or you can continue exploring this product knowing that the specs say it won’t fit.

Add to Cart