sPOD BantamX Touchscreen vehicle-specific kit for Toyota Tundra (’22-on) has been designed specifically to integrate the sPOD Touchscreen panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.
The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone.
- Fully programmable, digital controlled system
- 8 circuits rated at 30 amps at 12.5 VDC per circuit
- 16-position terminal block (easily attach accessories)
- 2 controller ports (RJ45) for Ethernet cables
- Integrated low voltage cutoff (LVCO) battery protection w/ optional override
- One ATM mini-style fuse for LVCO protection & reset
- Failsafe self-healing fault protection system (from 1.5 to 30amps)
- Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)
- 100amp fuse
- Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
- Operates on 12VDC or 24VDC
- 8-position input terminal block for controlling outputs
- Built-in Bluetooth capabilities for remote control
- Protection against: overheating, over-current, shorts, reverse polarity & field collapse
- Ignition control and safety lock-out for switches 1 and 2 (optional)
- Up to 4 BantamX units can be daisy chained & controlled by one Touchscreen
- On-demand wireless software updates/upgrades
HARDWARE:
- Powder-coated steel base w/ built in hardware
- Silicone gasket for weatherproofing
- Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement
- Universal & vehicle specific mounting options
- Robust insulated base and cover
FEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):
Each switch can be programmed for:
- Dimming
- Strobe
- Flash
- Momentary
- Switch Linking
- On Road and Off Road modes of operation
The following features are only available through the purchase of our Pro-Series mobile App:
- Circuit timers
- Switch lockout
- Initial startup current for each circuit is raised to 65amps for 5 seconds
- Program any circuit to be always on while still maintaining fault protection
- Option to disable deep sleep mode
- Selectable auto restart after circuit shuts down from over current/short
- Programmable Current Limiting (in 2amp increments up to 30amps)
- Selectable auto restart for current limiting shutdown
- Selectable “Latch” or “Momentary” actions for inputs
- Programmable ignition control for all 8 circuits
- Variable strobe function to create custom flash/strobe patterns
EXTERNAL CONTROLLER OPTIONS (not included with the system and can only be used in conjunction with an sPOD controller)
- Third-party switches
- Computers
- Arduino
- Raspberry Pi
- Alpine Audio systems KAC-001 head unit controller
- Sensors, thermostats, pressure switches, fan controllers & more
—-
TOUCHSCREEN CONTROL PANEL
Please note:
The touchscreen display will become inoperable if ambient temperatures drop below 20 degrees F. Let the temperature of the cab of the vehicle warm up before the operation.
Touchscreen Benefits:
- Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.
- Reduced wire harness complexity, using one harness to our controller to accommodate up to 32 circuits.
- Reduced harness size offers an overall reduction in weight, improving the operational efficiency of the equipment.
- Increase in switch lifecycle over traditional electromechanical switches.
Touchscreen Control Module Features:
- Voltage feedback (vehicles battery/alternator voltage)
- Amperage meter for each switch gives you the status of how much current each accessory is drawing
- Board temperature feedback (shown on screen)
- Customization: legends (3 lines of text)
- Automatic backlighting off after 30 minutes of being inactivity
- Automatic power off after 6 hours of being inactive or engine not running (Deep sleep mode)
- One touch-off function
- One second hold on off button shuts all circuits down
- Automatic system shut down when the touchscreen is unplugged
- Backlight dimming
- Multiple Source select (One touchscreen can control up to 32 circuits)
- Come with its own mounting bracket.
- Bluetooth for use in programming the touchscreen. *
*The primary reason for the Bluetooth integrated into the Touchscreen is for programming purposes, and not for remote control due to the limited range. Touchscreen housings are precision machined billet aluminum which contributes to the distance limitations. Ranges may vary from 5 feet up to 15 feet depending on the location of the Touchscreen, the surroundings, phone type, phone cover, and many other variables.
The S1 Vent Kit for the 2022-On Toyota Tundra utilizes the headlight vents to provide an exceptional light mounting location that fits and blends seamlessly with the OEM body lines. With its easy plug-and-play design, complete adjustability, the triple S1 configuration offers a versatile and reliable lighting solution for Tundra owners who want to optimize their lighting output. At Baja Designs, we continue to push the boundaries of what’s possible in the lighting industry, and the S1 Vent Kit is just another testament to our commitment to excellence. USPTO Reg No. 5,766,659
S1 setup includes the following:
- (2) S1, Spot LED
- (4) S1, Wide Cornering LED
- (2) Toggle Switch Harness
- (2) Splitter Harness
- (4) S1, Amber Wide Cornering Lens
- All necessary mounting brackets
- All necessary hardware
Specifications (Per Light):
- Lumens: 2,320
- 20W / 1.42A
The Baja Designs 20-inch S8 replacement grille light kit for the 2022-on Toyota Tundra TRD Pro gives you the ability to replace or add a light bar to the stock TRD Pro model grille. This kit allows you to maintain the low profile appearance while maximizing the performance with our 20-inch S8 light bar in a clear or baja amber driving/combo pattern, giving you 12,700 raw lumens of forward projected light illuminating lighting zones 1-4. This kit comes with everything you need for a painless install. Backed by our 30-day Satisfaction Guarantee and Lifetime limited warranty for the ultimate in purchase protection. NOTE: This kit fits the TRD Pro models only. If you have done the heritage grill conversion, you will need the conversion kit here
Kit includes:
- (1x) S8 20-inch light bar – Driving Combo Clear or Baja Amber
- (1x) Light Bar Bracket
- (2x) Upper Grille Support Bracket
- (1x) Wiring Harness – 640115
- (1x) S8 Backlit Harness – 640177
- All Necessary Mounting Hardware
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Only LED Driven At 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
Looking to get dust lights or reverse lights for your 2022-on Toyota Tundra? Baja Designs has you covered with our reverse light kit. This kit comes with two S2 Sport LED lights that offer up 1,581 raw lumens to illuminate zone 8 behind your vehicle. This provides safety when backing up allowing you see clearly behind your vehicle at night. This kit can also serve as a dust light on the trail. All lights, mounting brackets and wiring harness making it a breeze to get rear-facing light setup on your truck! Backed by our 30-day satisfaction guarantee and Lifetime limited warranty for the ultimate in purchase protection.
Kit Includes:
- (2x) S2 Sport – Wide Cornering Clear
- (2x) Mounting Brackets
- (2x) U-Bolts
- (1x) Wiring Harness – 640117
- (1x) Trigger Switch Harness – 640180
- (2x) 10ft. Extrnsion Harness – 640165
- (1x) Splitter Harness – 613606
- All Necessary Mounting Hardware
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Only LED Driven At 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
The Baja Designs 20-inch S8 grill kit for the 2022-on Toyota Tundra with the TRD grille conversion and the 2023-on Toyota Sequoia TRD model. This light kit gives you the ability to add a light bar for those that have done the TRD Pro grille conversion on their Toyota Tundra, giving the whole truck an aggressive look. This kit allows you to maintain the low profile appearance while maximizing the performance with our 20-inch S8 light bar in a clear or amber driving/combo pattern, giving you 12,700 raw lumens of forward projected light illuminating lighting zones 1-4. This kit comes with everything you need for a painless install. Backed by our 30-day Satisfaction Guarantee and Lifetime limited warranty for the ultimate in purchase protection.
Kit includes:
- (1x) S8 20-inch light bar – Driving Combo Clear or Baja Amber
- (1x) Light Bar Bracket
- (2x) Upper Grille Support Bracket
- (1x) Wiring Harness – 640115
- (1x) S8 Backlit Harness
- (1x) Stainless L Bracket
- All Necessary Mounting Hardware
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Safely Driving LEDs at 100%
5000K Daylight – Less Driver Fatigue, Natural Color
NOTE: This kit is designed for Toyota Tundra TRD Heritage grille conversion with shutter assembly only. It will not work for Toyota Tundra TRD Pro Models. Grille NOT included.
Baja Designs Toyota Tundra 2022 A-Pillar Kits give you the ability to continue your adventures late into the night. This kit utilize our LP4 LED lights. With the provided A-Pillar brackets, installation is simple and Baja Designs brackets are designed so there is no vibration, even when running down wash-board roads. To make this kit more versatile, we have included clear spot replacement lenses so you can customize your lens pattern.
LP4 setup includes the following:
- (2) LP4, Driving/Combo
- (2) A-Pillar Mounting Brackets
- (1) Wiring Harness
- (2) Clear Spot Replacent Lens Kits
- (1) IPT Reflector Cover Kit
- All necessary hardware
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Only LED Driven At 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
Baja Designs Toyota Tundra 2022 A-Pillar Kits give you the ability to continue your adventures late into the night! This kit utilize our XL80 LED lights. With the provided A-Pillar brackets, installation is simple and Baja Designs brackets are designed so there is no vibration, even when running down wash-board roads. For even more versatility, we have included both wide/cornering and spot replacement lens so you can customize your light pattern.
XL80 setup includes the following:
- (2) XL80, Driving/Combo
- (2) A-Pillar Mounting Brackets
- (2) XL Clear Spot Lens
- (2) XL Clear Wide Cornering Lens
- (1) Wiring Harness
- All necessary hardware
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Only LED Driven At 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
Baja Designs Toyota Tundra 2022 A-Pillar Kits give you the ability to continue your adventures late into the night! This kit utilize our XL Pro LED lights. With the provided A-Pillar brackets, installation is simple and Baja Designs brackets are designed so there is no vibration, even when running down wash-board roads.To make this kit more versatile, we have included clear spot and wide/cornering replacement lenses so you can customize your light pattern.
XL Pro setup includes the following:
- (2) XL Pro, Driving/Combo
- (2) A-Pillar Mounting Brackets
- (2) XL Clear Spot Lens
- (2) XL Clear Wide Cornering Lens
- (1) Wiring Harness
- All necessary hardware
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Only LED Driven At 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
Baja Designs Toyota Tundra 2022 A-Pillar Kits give you the ability to continue your adventures late into the night! This kit utilize our XL Sport LED lights. With the provided A-Pillar brackets, installation is simple and Baja Designs brackets are designed so there is no vibration, even when running down wash-board roads.
XL Sport setup includes the following:
- (2) XL Sport, Driving/Combo
- (2) A-Pillar Mounting Brackets
- (2) XL Clear Spot Lens
- (2) XL Clear Wide Cornering Lens
- (1) Wiring Harness
- All necessary hardware
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Only LED Driven At 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
The Baja Designs S2 Sport Fog light replacement kit for the 2022-on Toyota Tundra gives enthusiasts the ability to replace the factory lighting while maintaining the factory fit and finish. This kit offers four S2 Sport LED lights each offering 1,581 raw lumens to illuminate zones 1 and 2. The plug and play system comes with everything you need for quick and easy installation with no difficult wiring, trimming, or splicing. Backed by our 30-Day satisfaction gaurantee and Lifetime limited warranty for the ultimate in purchase protection.
ELS™ Scores:
Click to learn more about our Effective Lighting Score (ELS)
S2 Sport Wide Cornering Clear: ELS 72°/ 7.1/ 80’/ 1112
Clear: The original performance lens. Our clear lens combined with our 5000k LEDs provide light most similair to daylight, reducing driver fatigue and increase terrain recognition.
Baja Amber: This performance-driven lens is specifically designed for off-road driving in challenging conditions such as dust, rain, snow, or fog. The Baja Amber lens minimizes glare, enhancing visibility and significantly improving your driving experience.
Kit Includes:
- (4x) S2 Sport – Wide Cornering Clear or Amber
- (2x) Mounting Brackets
- (2x) Adaptor Harness
- All Necessary Moutning Hardware
Satisfaction Guarantee – 30-Day Money Back Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Only LED Driven At 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
Power Distribution System
