test

Fitment: 2024 Can-Am Maverick R

Can-Am Maverick R “Stage 3” Light Bundle

The Baja Designs “Stage 3” Can-Am Maverick R light kit offers everything you need to create the highest performing lighting kit for your UTV and explore beyond. We have packaged the top tier level kit that will get you the most light out front of your UTV, All backed by our 30 day satisfaction guarantee and lifetime limited warranty for the ultimate in purchase protection.

Stage 3 Kit Includes:

Can-Am Maverick R Triple S1 “Unlimited” Headlight Kit

Enhance your Can-Am Maverick R with the Baja Designs S1 Unlimited Laser Headlight Kit, a performance-driven solution that elevates factory headlights. Drive confidently with two sets of S1 LEDs delivering 2,320 raw lumens each across Zone 1, 2, and 3, complemented by an additional set of S1 laser lights at 500 raw lumens each for extended visibility into Zone 4 and 5. The kit includes a plug-and-play harness, mounting brackets, and installation components that create a seamless setup.

Can-Am Maverick R LP4 A-Pillar Kit

The Baja Designs LP4 A-Pillar LED Light kit for the Can-Am Maverick R are for those that are looking for additional lighting that our LP series provides with the Intergraded Peripheral Technology (IPT). The LP4s that come with our kits provides a total of 8,857 raw lumens each at 5.5A along with the IPT LEDs to provide a 200-degree spread of light. 

Can-Am Maverick R 40″ OnX6+ Roof Mount Kit

The Baja Designs OnX6+ 40-inch LED light bar redefines lighting on the trail for the Can-Am Maverick R by providing an unparalleled lighting solution. With an impressive 38,900 raw lumens on high beam and 32,440 raw lumens on low beam, this kit is engineered for those who crave speed, whether racing or conquering the dunes. 

Can-Am Maverick R “Stage 2” Light Bundle

The Baja Designs “Stage 2” Can-Am Maverick R light kit offers everything you need to upgrade from your base lighting kit and get see further down the trail. We have packaged the best middle tier kit that will get you more light out front of your UTV, All backed by our 30 day satisfaction guarantee and lifetime limited warranty for the ultimate in purchase protection.

Can-Am Maverick R Triple S1 Headlight Kit

Elevate your Can-Am Maverick R with the Baja Designs S1 Headlight Kit, engineered to deliver a high-performance lighting solution that replaces factory headlights. Drive with assurance as three sets of S1 LED lights generate an impressive 2,320 raw lumens each across Zone 1, 2, and 3. The kit includes a plug-and-play harness, mounting brackets, and installation components that create a seamless setup, ensuring you can spend less time wiring and more time on the trail.

S1 Kit includes the following:

  • (4) Baja Designs S1, Spot
  • (2) Baja Designs S1, Wide Cornering
  • (2) Headlight Adapter Harness
  • (4) Mounting Bracket
  • All necessary hardware

Specs for the S1 (Per Light):

  • Lumens: 2,320
  • 19.6W / 1.42A

Can-Am Maverick R XL Pro A-Pillar Kit

Expand your trail coverage with the Baja Designs XL Pro A-Pillar Lighting kit crafted for the Can-Am Maverick R. This kit features our advanced XL Pro LED lights, delivering 4,095 raw lumens each at 3A. Crafted for enthusiasts seeking enhanced illumination and versatility in their lighting setup. The XL Pro A-Pillar kit includes mounting brackets, wiring harness, and all necessary components for a hassle-free installation, guaranteeing a setup ready for the trail.

XL Pro setup includes the following:

  • (1) XL Pro Pair, Driving/Combo
  • (1) Wiring Harness
  • (2) Mounting Bracket
  • All necessary hardware

Specs for the XL Pro (Per Light):

  • Lumens: 4,095
  • 41.4W / 3.00A

Can-Am Maverick R 10″ OnX6+ Shock Tower Kit

With a low-profile appearance with the Baja designs OnX6+ 10” Shock Tower Kit, designed for the Can-Am Maverick R. The 10-inch OnX6+ light bar delivers an impressive 10,817 raw lumens, drawing 7.7 Amps. The kit includes a user-friendly plug-and-play harness, mounting brackets, and all necessary components for easy installation. Ensuring an easy trail-ready setup.

OnX6+ Kit includes the following:

  • (1) OnX6+, 10” Driving/Combo Light Bar
  • (1) Wiring Harness
  • (1) Mounting Bracket
  • All necessary hardware

Specs for the 10” OnX6 (Per Light):

  • Lumens: 10,817
  • 106.3W / 7.70A

Can-Am Maverick R “Stage 1” Light Bundle

The Baja Designs “Stage 1” Can-Am Maverick R light kit offers everything you need to start building your lighting kit and get on the trails safely. We have packaged the best entry level kit kit that will get you more light out front of your UTV, All backed by our 30 day satisfaction guarantee and lifetime limited warranty for the ultimate in purchase protection.

Can-Am Maverick R S2 Sport Chase Light Kit

Introducing the Baja Designs S2 Sport Chase light kit for the Can-Am Maverick R, designed to enhance the safety of your vehicle’s rear. Visibility on the trails is crucial, and the marker light’s ability to cut through dust ensures an added layer of safety during off-road adventures. With a potent output of 1,581 raw lumens at 12w, this kit offers the assurance of being prominently seen when leading the pack.

The S2 Sport setup includes the following:

  • (1) S2 Sport, Amber, Work/Scene
  • (1) Wiring Harness
  • All necessary hardware

Specs for the S2 Sport (Per Light):

  • Lumens: 1,581
  • 12.4W / 0.9A

Can-Am Maverick R 10″ S8 Shock Tower Kit

Experience enhanced illumination with the Baja Designs S8 10-inch Shock Tower Kit for the Can-Am Maverick R. The S8 light bar delivers 6,324 raw lumens at 4.2A, featuring a low-profile appearance. Complete with a plug-and-play harness and mounting brackets, installation is effortless, ensuring that you can get out on the trail as soon as possible.

The Baja Designs S8 includes the following:

  • (1) S8, 10” Driving/Combo Light Bar
  • (1) Wiring Harness
  • (2) Mounting Bracket
  • All necessary hardware

Specs for the 10” S8 (Per Light):

  • Lumens: 6,324
  • 57.9W / 4.20A

Can-Am Maverick R XL Sport A-Pillar Kit

Extend your trail coverage with the Baja Designs XL Sport A-Pillar Lighting kit designed for the Can-Am Maverick R. This comprehensive kit features our powerful XL Sport LED lights, each providing 3,162 raw lumens at 2.2A. Ideal for enthusiasts seeking to enhance illumination in zones 1, 2, and 3, the XL Sport A-Pillar kit adds versatility to your lighting package.

The XL Sport Kits Include the following:

  • (1) XL Sport Pair, Driving/Combo
  • (1) Wiring Harness
  • (2) Mounting Bracket
  • All necessary hardware

Specs for the XL Sport (Per Light):

  • Lumens: 3,162
  • 30.4W / 2.20A

Can-Am Maverick R Pre-Runner Bumper Kits – Can-Am Maverick R 2024

Baja Designs is proud to introduce a bolt-on Pre-Runner Bumper Kit for the Can-Am Maverick R, designed to compliment the aggressive styling of the vehicle. Not only does it provide ultimate protection on the front of the Maverick R, but it is an exceptional mounting solution for the selection of Baja Designs lights, from the Squadron Sport, LP6 to a 10-inch OnX6+ light bar. The pre-runner bumper is perfect for those who want a minimalist Baja inspired bumper while providing that extra layer of protection. Experience the assurance of our 30-day satisfaction guarantee and lifetime limited warranty, providing unparalleled protection for your kit.

Choose from the following light options:

  • (x3) Squadron Sport – Driving Combo Clear (3,162 raw lumens ea.)
  • (x2) XL Pro – Driving Combo Clear (4,095 raw lumens ea.)
  • (x2) XL80 – Driving Combo Clear (9,022 raw lumens ea.)
  • (x2) LP4 Pro Driving Combo Clear (8857 total raw lumens ea.)
  • (x2) LP6 Pro – Driving Combo Clear (11,225 total raw lumens ea.)
  • (x1) OnX6+ 10″ – Driving Combo Clear (10,817 raw lumens ea.)

Kits will come comes with:

  • Pre-Runner Bumper
  • Wiring Harnesses
  • All necessary hardware

Can-Am Maverick R Push Bar Bumper Kits – Can-Am Maverick R 2024

Baja Designs is proud to introduce a bolt-on push bar bumper Kit for the Can-Am Maverick R, designed to compliment the aggressive styling of the vehicle. Not only does it provide protection on the front of the Maverick R, but it is an exceptional mounting solution for the selection of Baja Designs lights, from the Squadron Sport, LP6 to a 10-inch OnX6+ light bar. The push-bar bumper is perfect for those who want a minimalist Baja inspired bumper while providing that extra layer of protection. Experience the assurance of our 30-day satisfaction guarantee and lifetime limited warranty, providing unparalleled protection for your kit.

Choose from the following light options:

  • (x3) Squadron Sport – Driving Combo Clear (3,162 raw lumens ea.)
  • (x2) XL Pro – Driving Combo Clear (4,095 raw lumens ea.)
  • (x2) XL80 – Driving Combo Clear (9,022 raw lumens ea.)
  • (x2) LP4 Pro Driving Combo Clear (8,857 total raw lumens ea.)
  • (x2) LP6 Pro – Driving Combo Clear (11,225 total raw lumens ea.)
  • (x1) OnX6+ 10″ – Driving Combo Clear (10,817 raw lumens ea.)

All kits include:

  • Push-Bar Bumper
  • Wiring Harness
  • Splitter Harness
  • All necessary mounting hardware

Can-Am Maverick R Mini6 SourceLT Center Console Kit – Can-Am Maverick R 2024

The sPOD SourceLT Mini6 vehicle-specific kit for the Can-Am Maverick R has been designed specifically to integrate the sPOD Mini6 panel into your cabin seamlessly while providing a safe place to access all your controls. Engineered to take control, the SourceLT provides 6-circuits and a safe way to power/control your accessories. The small footprint of the SourceLT means that it won’t take up much room. No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. All sPOD systems are backed by a 5-year manufacturer warranty for the ultimate in purchase protection.

The SourceLT Mini6 setup includes the following:

  • (1) SourceLT System
  • (1) 36” Battery Cable Set
  • (1) Mini6 Switch Panel
  • (1) Ethernet Cable
  • (1) Mounting Bracket
  • All necessary hardware

Specs for the SourceLT:

  • 6 circuits rated at 30 amps at 12.5 VDC per circuit
  • 12-position terminal block
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC
  • Built in Bluetooth capabilities for remote control

Can-Am Maverick R HD BantamX Center Console Kit – Can-Am Maverick R 2024

Elevate your Can-Am Maverick R experience with the sPOD BantamX HD kit. Designed for seamless integration, it provides secure access to controls, featuring 8 circuits for safe accessory power. Its compact design ensures minimal space usage, eliminating the need for complex modifications like cutting or tapping into the vehicle’s electrical system. Simplify your aftermarket electrical accessories with the unmatched versatility of the sPOD BantamX. All sPOD systems are backed by a 5-year manufacturer warranty for the ultimate in purchase protection.

The BantamX HD setup includes the following:

  • (1) BantamX System
  • (1) 36” Battery Cable Set
  • (1) HD Switch Panel
  • (1) Ethernet Cable
  • (1) Mounting Bracket
  • All necessary hardware

Specs for the BantamX:

  • 8 circuits rated at 30 amps at 12.5 VDC per circuit
  • 16-position terminal block
  • 2 controller ports (RJ45) for Ethernet cables
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC
  • Built in Bluetooth capabilities for remote control

Can-Am Maverick R Mini6 Steering Wheel Mount Kit – Can-Am Maverick R 2024

The sPOD SourceLT Mini6 Steering Wheel Kit is designed to seamlessly integrate into the steering wheel of the Can-Am Maverick R, giving you the power to control up to 6 accessories, each with a 30-amp rating, for a total of 100 amps. Say goodbye to the hassle of searching for switches on the dash and say hello to effortless, thumb-activated control.
1. Effortless Control at Your Fingertips: Mounted directly onto your steering wheel, the sPOD SourceLT Mini 6 brings your accessory controls to your fingertips. With a simple swipe of your thumb, you can focus on driving without worrying about the location of your switches. It’s the ultimate in convenience and safety.
2. Seamless Integration: The sPOD system is ingeniously designed to fit seamlessly onto your steering wheel, ensuring a perfect fit and finish. No more bulky, inconvenient control panels – it’s all right there where you need it.
3. Coiled Cable for Smooth Operation: Located under the plate where the sPOD resides is a coiled cable, ensuring that you won’t encounter any binding issues when turning your wheel from lock to lock. Your steering remains as responsive as ever, even with the sPOD in place.
4. Easy Installation: Connecting your accessories is a breeze. A single ethernet cable runs discreetly behind your dashboard to the Source LT unit, which is conveniently mounted in the footwell. There is no need for relays, wiring looms, or circuit fuses, making it one of the simplest solid-state power management systems on the market.
5. Built-in Battery Protection: The sPOD SourceLT Mini 6 is not only about convenience but also about safety. It features a 12-position terminal block with integrated low-voltage cutoff battery protection, ensuring your vehicle’s electrical system remains reliable and secure.
With its intuitive design, the sPOD SourceLT Mini 6 Steering Wheel Kit offers you a level of control and convenience that is second to none. All sPOD systems are backed by a 5-year manufacturer warranty for the ultimate in purchase protection.

The SourceLT Mini6 setup includes the following:

  • (1) SourceLT System
  • (1) 36” Battery Cable Set
  • (1) Mini6 Switch Panel
  • (1) Ethernet Cable
  • (1) Mounting Bracket
  • All necessary hardware

Specs for the SourceLT:

  • 6 circuits rated at 30 amps at 12.5 VDC per circuit
  • 12-position terminal block
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC
  • Built in Bluetooth capabilities for remote control

Can-Am Maverick R HD Steering Wheel Mount Kit – Can-Am Maverick R 2024

The sPOD HD Steering Wheel Kit is designed to seamlessly integrate into the steering wheel of the Can-Am Maverick R, giving you the power to control up to 8 accessories, each with a 30-amp rating, for a total of 100 amps. Say goodbye to the hassle of searching for switches on the dash and say hello to effortless, thumb-activated control. With its intuitive design, the sPOD HD Steering Wheel Kit offers you a level of control and convenience that is second to none. All sPOD systems are backed by a 5-year manufacturer warranty for the ultimate in purchase protection.

 

Effortless Control at Your Fingertips:

Mounted directly onto your steering wheel, the sPOD BantamX HD places accessory controls at your fingertips. A simple thumb swipe allows you to focus on driving without distractions, ensuring ultimate convenience and safety.

 

Seamless Integration:

The sPOD system seamlessly fits onto your steering wheel, eliminating bulky control panels. Everything is conveniently placed right where you need it, ensuring a perfect fit and finish.

 

Coiled Cable for Smooth Operation:

Beneath the sPOD resides a coiled cable, ensuring smooth wheel operation from lock to lock. Your steering remains responsive, even with the sPOD in place.

 

Easy Installation: Connecting accessories is a breeze with a discreet ethernet cable running behind the dashboard to the BantamX unit, conveniently mounted in the footwell. Say goodbye to relays, wiring looms, or circuit fuses, as this kit offers one of the simplest solid-state power management systems on the market.

The BantamX HD setup includes the following:

  • (1) BantamX System
  • (1) 12” Battery Cable Set
  • (1) HD Switch Panel
  • (1) Ethernet Cable
  • (1) Mounting Bracket
  • All necessary hardware

Specs for the BantamX:

  • 8 circuits rated at 30 amps at 12.5 VDC per circuit
  • 16-position terminal block 
  • 2 controller ports (RJ45) for Ethernet cables
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC
  • Built in Bluetooth capabilities for remote control

Can-Am Maverick R 40″ S8 Roof Mount Kit – Can-Am Maverick R 2024

Elevate your Can-Am Maverick R with Baja Designs S8 40-inch LED light bar, engineered to stand out among the competition. Boasting a sleek low-profile design, this light bar delivers an impressive 25,400 raw lumens, incorporating our high-performance reflectors and a distinctive amber backlight feature. The kit includes the S8 light bar, mounting brackets, a thoughtfully designed wiring harness, and all essential components that ensure a seamless installation process for a trail-ready setup. Complete with a 30-day satisfaction guarantee and a lifetime limited warranty, providing unparalleled protection for your investment.

The S8 Kit includes the following:

  • (1) S8, 40” Driving/Combo Light Bar
  • (1) Wiring Harness
  • (2) Mounting Bracket
  • All necessary hardware

Specs for the 40” S8 (Per Light):

  • Lumens: 25,400
  • 240W / 16.0A