test

sPOD SourceLT Switch Panel Kit – Polaris RZR Pro R 2022-2024

The 8 Switch setup includes the following:

  • (1) BantamX System
  • (1) 84” Battery Cable Set
  • (1) 8 LED Switch Panel
  • (1) 10’ Ethernet Cable
  • (1) Mounting Bracket
  • All necessary hardware

Specs for the BantamX:

  • 8 circuits rated at 30 amps at 12.5 VDC per circuit
  • 16-position terminal block
  • 2 controller ports (RJ45) for Ethernet cables
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC
  • Built in Bluetooth capabilities for remote control

The 6 Switch setup includes the following:

  • (1) SourceLT System
  • (1) 84” Battery Cable Set
  • (1) 6 LED Switch Panel
  • (1) 10’ Ethernet Cable
  • (1) Mounting Bracket
  • All necessary hardware

Specs for the SourceLT:

  • 6 circuits rated at 30 amps at 12.5 VDC per circuit
  • 12-position terminal block
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC
  • Built in Bluetooth capabilities for remote control

Polaris RZR Pro R 2022-2023, HD BantamX Kit – Polaris RZR Pro R 2022-2023

sPOD BantamX HD vehicle-specific kit for the Polaris Pro R (2022+) UTV has been designed specifically to integrate the sPOD HD panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to mount the control panel on the roof bar of your Pro R while having your BantamX tucked away at the lower foot panel.

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone. NOTE: The PCM bracket in this kit will interfere with aftermarket accessories mounted on the passager footwell.

This setup includes the following:

  • (1) BantamX System
  • (1) 84” Battery Cable Set
  • (1) HD Switch Panel
  • (1) 10’ Ethernet Cable
  • (2) Mounting Bracket
  • All necessary hardware

Specs for the BantamX:

  • 8 circuits rated at 30 amps at 12.5 VDC per circuit
  • 16-position terminal block
  • 2 controller ports (RJ45) for Ethernet cables
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC
  • Built in Bluetooth capabilities for remote control

 

SourceLT/Mini6 Steering Wheel Mount Kit – Polaris RZR Pro R/Turbo R 2022-2024; Pro XP 2020-2024

The sPOD SourceLT Mini6 Steering Wheel Kit is designed to seamlessly integrate into the steering wheel of the Polaris RZR Pro R, Turbo R, and Pro XP, giving you the power to control up to 6 accessories, each with a 30-amp rating, for a total of 100 amps. Say goodbye to the hassle of searching for switches on the dash and say hello to effortless, thumb-activated control. 

  1. Effortless Control at Your Fingertips: Mounted directly onto your steering wheel, the sPOD SourceLT Mini 6 brings your accessory controls to your fingertips. With a simple swipe of your thumb, you can focus on driving without worrying about the location of your switches. It’s the ultimate in convenience and safety.
  2. Seamless Integration: The sPOD system is ingeniously designed to fit seamlessly onto your steering wheel, ensuring a perfect fit and finish. No more bulky, inconvenient control panels – it’s all right there where you need it.
  3. Coiled Cable for Smooth Operation: Located under the plate where the sPOD resides is a coiled cable, ensuring that you won’t encounter any binding issues when turning your wheel from lock to lock. Your steering remains as responsive as ever, even with the sPOD in place.
  4. Easy Installation: Connecting your accessories is a breeze. A single ethernet cable runs discreetly behind your dashboard to the Source LT unit, which is conveniently mounted in the footwell. There is no need for relays, wiring looms, or circuit fuses, making it one of the simplest solid-state power management systems on the market.
  5. Built-in Battery Protection: The sPOD SourceLT Mini 6 is not only about convenience but also about safety. It features a 12-position terminal block with integrated low-voltage cutoff battery protection, ensuring your vehicle’s electrical system remains reliable and secure.

With its intuitive design, the sPOD SourceLT Mini 6 Steering Wheel Kit offers you a level of control and convenience that is second to none. 

NOTE: The PCM bracket in this kit will interfere with aftermarket accessories mounted on the passenger footwell.

This setup includes the following:

  • (1) SourceLT System
  • (1) 84” Battery Cable Set
  • (1) Mini6 Switch Panel
  • (1) Ethernet Cable
  • (3) Mounting Bracket
  • All necessary hardware

Specs for the SourceLT:

  • Control up to 6 accessories with ease.
  • 30 amps per channel, 100 amps of total power management capacity.
  • Seamless integration with your vehicle’s steering wheel.
  • Coiled cable design for unrestricted wheel movement.
  • Simplified installation with no relays or circuit fuses.
  • Integrated low-voltage cutoff battery protection.
  • 12-position terminal block for enhanced connectivity.
  • Bluetooth control, flash, dimming, strobe, momentary
  • Direct integration for the Polaris RZR Pro XP, Turbo R, and Pro R models

sPOD BantamX Switch Panel Kit – Polaris RZR Pro R 2022-2024

The 8 Switch setup includes the following:

  • (1) BantamX System
  • (1) 84” Battery Cable Set
  • (1) 8 LED Switch Panel
  • (1) 10’ Ethernet Cable
  • (1) Mounting Bracket
  • All necessary hardware

Specs for the BantamX:

  • 8 circuits rated at 30 amps at 12.5 VDC per circuit
  • 16-position terminal block
  • 2 controller ports (RJ45) for Ethernet cables
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC
  • Built in Bluetooth capabilities for remote control

The 6 Switch setup includes the following:

  • (1) SourceLT System
  • (1) 84” Battery Cable Set
  • (1) 6 LED Switch Panel
  • (1) 10’ Ethernet Cable
  • (1) Mounting Bracket
  • All necessary hardware

Specs for the SourceLT:

  • 6 circuits rated at 30 amps at 12.5 VDC per circuit
  • 12-position terminal block
  • Integrated low voltage cutoff battery protection w/ optional override
  • 100 amp in-line fuse
  • Operates on 12 VDC or 24 VDC
  • Built in Bluetooth capabilities for remote control

Polaris RZR Pro R XL 80 A-Pillar Kit – Polaris RZR Pro R 2022-2024

The Polaris RZR Pro R was built for speed and Baja Designs has developed A-Pillar Kits for enthusiasts to do just that with confidence late into the night. Utilizing our XL series this allows the user to pick the lighting package that is best for their needs. Ranging from our XL Sport at 3,162 lumens to our brightest solution, our XL80 at 9,022 lumens.

Baja Designs has also developed an LP4 A-Pillar kit for those who appreciate the additional light that our LP series provide with our patented Integrated Peripheral Technology (IPT). The IPT’s allow for a 200 degree spread of light and you no longer need to worry about that light being spread into the cab due to our provided IPT covers. You will place the covers on the inside IPT of each light and you’ll than be ready to explore late into the night.

The XL80 setup includes the following:

  • (1) XL80, Pair Driving/Combo LED
  • (2) A-Pillar Bracket
  • (1) Wiring Harness
  • All necessary hardware

Polaris RZR Pro R XL Pro A-Pillar Kit – Polaris RZR Pro R 2022-2024

The Baja Designs XL Pro A-pillar light kit for the Polaris RZR Pro R was built for speed and for enthusiasts that want confidence late into the night. This kit comes with the XL Pro offering 4,095 raw lumens each to light up the trail and perfect for enthusiasts that need a vast amount of light in a versatile package.  The XL Pro uses Baja Designs’ trademarked high-speed spot reflectors providing for a longer and wider beam pattern with our next-generation LED technology that provides 65% greater distance over our previous generation lights. Designed for users who want reliable off-road lighting solutions, all Baja Designs lights are backed by a 30-day satisfaction guarantee and a limited lifetime warranty for the ultimate in purchase protection.

The XL Pro setup includes the following:

  • (2x) XL Pro Driving/Combo LED
  • (2x) A-Pillar Bracket
  • (1x) Wiring Harness (640302)
  • (2x) XL Lens Kit – Clear Spot
  • (2x) XL Lens Kit – Clear Wide Cornering
  • All necessary hardware

Polaris RZR Pro R LP4 A-Pillar Kit – Polaris RZR Pro R 2022-2024

The Polaris RZR Pro R was built for speed and Baja Designs has developed A-Pillar Kits for enthusiasts to do just that with confidence late into the night. Utilizing our XL series this allows the user to pick the lighting package that is best for their needs. Ranging from our XL Sport at 3,162 lumens to our brightest solution, our XL80 at 9,022 lumens.

Baja Designs has also developed an LP4 A-Pillar kit for those who appreciate the additional light that our LP series provide with our patented Integrated Peripheral Technology (IPT). The IPT’s allow for a 200 degree spread of light and you no longer need to worry about that light being spread into the cab due to our provided IPT covers. You will place the covers on the inside IPT of each light and you’ll than be ready to explore late into the night.

The LP4 setup includes the following:

  • (1) LP4, Pair Driving/Combo LED
  • (2) A-Pillar Bracket
  • (1) LP4, IPT Reflector Cover, Kit
  • (1) Wiring Harness
  • All necessary hardware

Polaris RZR Pro R XL Sport A-Pillar Kit – Polaris RZR Pro R 2022-2024

The Baja Designs XL Sport A-Pillar light kit for the Polaris RZR Pro R was built for speed, giving enthusiasts confidence while blazing the trails late into the night. Utilizing our XL Sport light pods offering 3,162 raw lumens each illuminating zones 1, 2, 3 while offering light within zone 4. The kit will come with lights, mounting brackets, wiring harness and additional lenses that will allow you to customize your light pattern thanks to our uService technology. Backed by our 30-Day Satisfaction Guarantee and Lifetime Limited Warranty for the ultimate in purchase protection.

The XL Sport setup includes the following:

  • (2x) XL Sport, Clear Driving/Combo 
  • (2x) A-Pillar Bracket
  • (1x) Wiring Harness (640302)
  • (2x) XL Lens Kit – Clear Spot
  • (2x) XL Lens Kit – Clear Wide Cornering
  • All necessary hardware

Polaris RZR Pro R RTL Kit – Polaris RZR Pro R 2022-2024

The Baja Designs RTL Kits for the Polaris RZR Pro R are not only easy to install but add additional safety to your UTV. There are three options that you are able to select from, each having their own specific features. The RTL and RTL-W kits utilize brake, amber and a white reverse light; however, our standard RTL has two solid ambers, and our RTL-W has one solid amber and one running amber. The last option is our RTL-S which is our RTL with integrated turn signals. The RTL-S harness that is included with this kit is ready to go out of the package so there is no complicated wiring required. If you are wanting to add style to your UTV as well as get additional safety, this kit is for you!

The RTL setup includes the following:

  • (1) RTL, 30” Light Bar
  • (2) RTL Bracket
  • (1) Wiring Harness
  • (1) Tail Light Splice Adapter
  • All necessary hardware

Polaris RZR Pro R S8 10″ Hood Mount Kit – Polaris RZR Pro R 2022-2024

The all new S8 Hood Kits for the Polaris RZR Pro R pack a serious amount of light with a low profile appearance. The 10” S8 included in the kit projects 6,324 lumens and a low amp draw of 4.2 amps. The Baja Designs S8 Hood Kits provide everything required, making for an easy installation, and no cutting or drilling required. If you’re looking for a kit to extend your light driving experience, this kit is for you!

The S8 10″ setup includes the following:

  • 1) S8, 10” Driving/Combo, LED Light Bar
  • (2) Hood Bracket
  • (1) Wiring Harness
  • All necessary hardware