The Baja Designs S8 20-inch bumper light bar kit for the GMC Sierra 2500/3500 trucks is designed specifically to keep a low profile while allowing for maximum performance. The kit includes mounts that fit into factory locations without cutting or trimming and includes both the wiring and a 20 inch S8 Driving/Combo providing 12,700 raw lumens at 8.0A. With the S8, you will be able to utilize its back lit feature giving a differentiating look from other trucks. Backed by our 30-Day Satisfaction Guarantee and Limited Lifetime Warranty for the ultimate in purchase protection.
Kit comes with:
- (1x) S8 20-inch Light Bar Driving Combo (Clear)
- (2x) Mounting Brackets
- (1x) Wiring Harness 640115
- (1x) Backlight add-on harness 640177
- All necessary mounting hardware
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Safely Driving LEDs at 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
This is a turn key solution for anyone that is interested in serious lighting performance with styling in mind. This Dual S8 behind the grill kit will provide you with over 38,000 lumens and an amber backlit feature without cutting or drilling. This kit will include a wiring harness, 3-pin splitter, and amber backlit fuse tap kit. This combination will enable users to tap into their vehicle’s ignition which will automatically trigger the amber backlit LEDs. This attractive safety feature is pleasing to the eye, while drawing minimal amps and keeping you visible while out on the trail.
This kit does not fit the GMC AT4 model due to grill being different.
The Baja Designs S2 Reverse kit for the GMC Sierra 2500/3500 has got you covered with light behind your vehicle. This kit comes with S2 Sports producing 1,581 raw lumens each at 12W to illuminate Zone 8 behind your vehicle safely. This kit as been designed as an easy installation and comes with everything you need for a quick install, with brackets and wiring harness making it a breeze to get rear-facing light on your GMC truck. Backed by our 30-Day Satisfaction Guarantee and Limited Lifetime Warranty for the ultimate in purchase protection.
Kit Includes:
- (2x) S2 Sport Wide Cornering (Clear)
- (1x) Wiring Harness 640099
- (1x) Splitter Harness 613606
- All necessary hardware for installation
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Safely Driving LEDs at 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
For anyone that’s interested in serious lighting performance with styling in mind, the S8 behind-the-grille kit for the GMC Sierra 2500HD/3500HD (’20-22) will provide you with over 19,050 lumens and an amber backlit feature without cutting or drilling. This kit will include a wiring harness, a 3-pin splitter, and an amber backlit fuse tap kit. This combination will enable users to tap into their vehicle’s ignition which will automatically trigger the amber backlit LEDs. A turn-key solution with attractive safety features, pleasing to the eye while drawing minimal amps will keep you safe while on the trails. Backed by our 30-Day Satisfaction Guarantee and Lifetime Limited Warranty for the ultimate in purchase protection.
Comes with:
- S8 30″ light bar, driving combo clear (x1)
- Behind the grille mounting brackets (x2)
- Wiring harness – 640115 (x1)
- S8 backlight wiring harness – 640177 (x1)
- Mounting hardware
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Safely Driving LEDs at 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
The Baja Designs dual S1 Fog Pocket kit for the GMC Sierra 2500/3500 is the perfect mix of high-quality on and off-road performance. Available in Clear or Amber, this kit utilizes the factory fog pocket location to pack two S1 lights on each side, offering 2,320 raw lumens per light at only 1.42A. This kit utilizes the factory fog switch to operate the lower pair S1 lights and the high beam function operates the upper pair of S1 lights. The included wiring harness is designed to be used in conjunction with factory light switches, and sPOD / Switch Pros units. If you’re looking to add not only safety but lighting performance this is your kit! Backed by our 30-Day Satisfaction Guarantee and Limited Lifetime Warranty for the ultimate in purchase protection. US Patent Number 11273751.
Kit Comes with:
- (2x) S1 Spot (Clear)
- (2X) S1 Wide Cornering (Clear or Amber)
- (2x) Mounting Brackets
- (1x) Wiring Harness 640117
- (1x) Trigger Switch Harness 640180
- (2x) Splitter Harness
- All necessary mounting hardware
uService – Replaceable Lenses And Optics
ClearView – All The Light, Right Where You Need It
MoistureBlock – Waterproof, Rain Proof, Submersible
CopperDrive – Safely Driving LEDs at 100 Percent
5000K Daylight – Less Driver Fatigue, Natural Color
Our Universal Rock Light Kit takes the guess work out of buying wiring and trying to figure out how to pin relays. All of the lengths are pre-cut to reach all four corners of your small to mid-sized vehicle with some wiggle room on each lead to route the wiring any desired way. This kit includes four 400 lumen rock lights and wiring for a truly turn key kit. These LED lights are waterproof and can be mounted virtually anywhere. All that is needed is 12 volt power. They have a 180 degree optic to illuminate your wheel wells or anywhere else you need a bright and smooth light.
Caution: Rock Light can get very hot when used for long periods of time. Please use caution when handling or installing.
Power Distribution System
