SourceLT w/ Mini6 - Universal

Overall rating: 5.0 / 5 from 1 reviews.

AI Generated Review Summary

Summary topics

Review topics: [].

Review highlights

Reviews

Install on 2024 4Runner TRD Off Road

"Purchased this to control my ditch and grill lights on my 2024 4Runner TRD Off Road. While this is an expensive method to control accessories, it is by far the best means without having multiple wires into the passenger cabin, finding a place for individual switches, and no tapping into OEM wiring. I mounted the sPOD Mini6 with double sided tape on the included bracket just below the temp controls, in front of the small (and useless) cubby space. I drilled a small hole at the back of the cubby space to run the Cat-6 wire through. Other than that, not other holes or change to OEM parts/placement was required. On my 4Runner in the engine bay (driver side) were two 10x1. 25mm threaded holes just under the hood gas spring. Spacing was exactly the same as the mounting holes for the control modual. Using two pieces of alum flat stock, 1. 5”w * 0. 125”T * 6”L, I mounted the control unit to those and then bolted that in place using the two OEM threaded holes. Used rubber grommets to isolate the AL from steel body to prevent galvanic reaction. Bolts were stainless steel. I found this install to be cleaner than moving the OEM relay pod towards the firewall, which could risk voiding the vehicle warranty. (Saw that method on YouTube) My ditch lights are Diode Dynamic SSC2 Pro Combo, which have a backlight. I wired each light separately, using 4 of the 6 switches. This allows me to turn off the driver side main light with on coming traffic. Just a personal choice, but not necessary. If you want a very clean professional OEM looking system, this is the way to go."

— JPH (5/5)

Q&A

starting at:
$588.95
PRODUCT OPTIONS
Battery Cable
Quantity

OR

Proposition 65 Warning
Baja Designs California Proposition 65

Description

Simplify your vehicle’s wiring setup with the sPOD SourceLT Mini6 Universal Power Management System, a cutting-edge solid-state 6-circuit control system designed to streamline the installation of 12VDC accessories. Say goodbye to messy wiring and complicated setups—just one cable runs into the cab, making it the cleanest and most efficient solution for your aftermarket electrical accessories.

With its compact design and versatile mounting options, the SourceLT offers a seamless way to power, control, and protect your gear without cutting or tapping into your vehicle’s factory wiring.

The sPOD SourceLT is the ultimate wiring solution for enthusiasts, overlanders, and off-roaders who demand performance, reliability, and ease of installation. Whether you're powering lights, compressors, or other 12V accessories, SourceLT delivers stable power, smart control, and unmatched installation flexibility. Backed by a 5-year Manufacturer's Warranty for peace of mind. 

Features:

• 6 circuits rated at 30 amps at 12.5 VDC per circuit
• 12-position terminal block (easily attach accessories)
• Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller
• Integrated low voltage cutoff (LVCO) battery protection w/ optional override
• Self-healing fault protection circuits (from 1.5 to 30amps)
• Current-sensing MOSFETs controlled by a microprocessor (no fuses & no relays)
• 100amp in-line fuse
• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
• Operates on 12VDC
• Built-in Bluetooth capabilities for remote control
• Protection against: overheating, over-current, shorts, reverse polarity and field collapse
• On-demand wireless software updates/upgrades 

Hardware:

• Powder coated steel base w/ built in hardware
• Silicone gasket for weatherproofing
• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends
• Universal & vehicle specific mounting options
• Robust insulated base and cover

MINI6 CONTROL PANEL:

  • Panel Dimensions: 2.062" W x 3.260" L x .375" D
  • Programmable modes: momentary / latch and backlight brightness level
  • Visual feedback circuit ON indicator light for each button
  • Includes one sheet of 72 standard legends
  • Power-saving Deep Sleep Mode: Deactivates after 6 hours of inactivity
  • Silicone buttons for easy touch activation
  • Can run in conjunction with a 6-switch panel
  • CAT-6 Ethernet connected (up to 25 feet from SourceLT)

Features available through sPOD App:

Each switch can be programmed for:
• Dimming
• Strobe
• Flash
• Momentary
• Switch Linking
• On-Road and Off-Road mode of operation

BLUETOOTH REQUIREMENTS:

  • Access to iTunes or Google Play Store to download the sPOD app 
  • Bluetooth 4.0 compatible 
  • Compatible with Android devices running 8.0 Oreo (API 26) or later 
  • Compatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini 
  • Must have existing sPOD system

Disclaimer and Warning

Disclaimer

Buyer is responsible for ensuring that it uses the products (and its vehicle) in accordance with all applicable laws, regulations, guidelines, and standards of care. Buyer acknowledges that some products may only be used when off-roading, and Buyer will comply with all vehicle and road safety guidelines. Buyer is solely responsible for (and will indemnify and hold Bestop harmless for) any claims, losses, damages, fines, fees, costs, or other amounts arising out of Buyer’s non-compliance with these provisions.

Baja Designs California Proposition 65

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Simplify your vehicle’s wiring setup with the sPOD SourceLT Mini6 Universal Power Management System, a cutting-edge solid-state 6-circuit control system designed to streamline the installation of 12VDC accessories. Say goodbye to messy wiring and complicated setups—just one cable runs into the cab, making it the cleanest and most efficient solution for your aftermarket electrical accessories.

With its compact design and versatile mounting options, the SourceLT offers a seamless way to power, control, and protect your gear without cutting or tapping into your vehicle’s factory wiring.

The sPOD SourceLT is the ultimate wiring solution for enthusiasts, overlanders, and off-roaders who demand performance, reliability, and ease of installation. Whether you're powering lights, compressors, or other 12V accessories, SourceLT delivers stable power, smart control, and unmatched installation flexibility. Backed by a 5-year Manufacturer's Warranty for peace of mind. 

Features:

• 6 circuits rated at 30 amps at 12.5 VDC per circuit
• 12-position terminal block (easily attach accessories)
• Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller
• Integrated low voltage cutoff (LVCO) battery protection w/ optional override
• Self-healing fault protection circuits (from 1.5 to 30amps)
• Current-sensing MOSFETs controlled by a microprocessor (no fuses & no relays)
• 100amp in-line fuse
• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
• Operates on 12VDC
• Built-in Bluetooth capabilities for remote control
• Protection against: overheating, over-current, shorts, reverse polarity and field collapse
• On-demand wireless software updates/upgrades 

Hardware:

• Powder coated steel base w/ built in hardware
• Silicone gasket for weatherproofing
• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for placement of supplied legends
• Universal & vehicle specific mounting options
• Robust insulated base and cover

MINI6 CONTROL PANEL:

  • Panel Dimensions: 2.062" W x 3.260" L x .375" D
  • Programmable modes: momentary / latch and backlight brightness level
  • Visual feedback circuit ON indicator light for each button
  • Includes one sheet of 72 standard legends
  • Power-saving Deep Sleep Mode: Deactivates after 6 hours of inactivity
  • Silicone buttons for easy touch activation
  • Can run in conjunction with a 6-switch panel
  • CAT-6 Ethernet connected (up to 25 feet from SourceLT)

Features available through sPOD App:

Each switch can be programmed for:
• Dimming
• Strobe
• Flash
• Momentary
• Switch Linking
• On-Road and Off-Road mode of operation

BLUETOOTH REQUIREMENTS:

  • Access to iTunes or Google Play Store to download the sPOD app 
  • Bluetooth 4.0 compatible 
  • Compatible with Android devices running 8.0 Oreo (API 26) or later 
  • Compatible with iOS 11 or newer, iPhone 7s or newer, iPad 2 or newer, iPad mini 
  • Must have existing sPOD system

">
Show All Reviews